Advertisement
5.5.
EMPTYING OIL DRAINER (AK80D.V2) by pump.
5.5.1. Remove the drain port cover and install the pump using the 2" BSP adaptor (fig.2). Ensure that the pick-up tube reaches the bottom of the
reservoir.
5.5.2. Fit a suitable hose to the pump outlet and connect to the waste oil tank. Pump out as necessary.
6.
MAINTENANCE
6.1. Clean the drain pan filter frequently; a blocked filter can cause the drain pan to overflow.
6.2. Clean the exterior of the unit regularly with paper towel or cleaning cloth.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
AK80D.V2 shown with TP55 pump (not
supplied) fitted into drain port.
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
www.sealey.co.uk
AK36D.V2, AK80D.V2
Issue:1 - 12/10/17
Advertisement
