2. Connect the other end of the cable to the VT100 console or to a system
Connecting Power and Turning the Power On
A power switch and a receptacle for the power cord are located on each power
supply on the back of the appliance as shown in
Figure 11 Power Switch Location
IP560 Security Platform Installation Guide
port of the IP560. You can easily remove the console cable by pulling
back on the shroud.
If you connect the console port to a data communications equipment
(DCE) device, use a straight-through cable.
SLOT 1
For cable pin assignments for the console connection, see
on page 25.
running a terminal-emulation program.
Power supply
Power cord receptacle
Connecting Power and Turning the Power On
SLOT 2
Console port
Power switch
SLOT 3
SLOT 4
1
2
3
4
"Console Port"
Figure
11.
IP560
00350
00353
47