LG 42LV5500 Training Presentation page 56

MAIN BOARD SECTION
The Main board receives its operational B+ from the Power Supply via P502.
There are two LVDS cable feeds that are output to the T-CON (TFT Driver). These carry the duel 24 bit
LVDS Video and TruMotion Video equaling a 120Hz video signal. These signals have already been
prepared for the T-CON board. The Main board also includes the Tuner, Audio and Audio/Video
inputs and selection circuits.
Input Voltages from SMPS.
STAND-BY
• STBY 3.5V (P502 pins 9~12)
The Main board also develops several B+ sources on the board.
STAND-BY VOLTAGES
• 3.3V_ST (Direct from SMPS through L503).
LVDS
• Panel VCC (12V Not generated, but switched Panel_VCC (12V Not generated, but switched
by Q507 from the 12V arriving from the SMPS).
TUNER TU2101 and VSB CIRCUIT
• 5V_TU (Made from 5V_Normal through L2101 / 4)
• 3.3V_TU (Made from 3.3V_Normal L2103).
• 1.26V_TU IC2103 (Made from 3.3V_TU). 1 26V TU IC2103 (M d f
AUDIO IC1702
• 3.3V_AU_AVDD (Made from 3.3V_Normal).
• 3.3V_DVDD (Made from 3.3V_Normal).
• 1.8V (Made from 3.3V Normal). 1.8V (Made from 3.3V_Normal).
• 24V (Direct from SMPS through L504).
3 3V TU)
56
RUN
• 12V (P502 pins 17, 19 and 21).
• 24V (P502 pins 2~4).
GENERAL
• 5V_Normal IC507 (Made from 12V In).
• 3.3V_Normal IC505 (Made from 12V In).
• 5V USB IC506 (Made from 12V In).
BCM IC101 Video Processor
• 3.3V_ST (Direct from SMPS through L503).
• 2.5V_BCM52230 (IC504)
• D1.5V_DDR (IC508 )
• 0.9V_CORE (IC501) 0 9V CORE (IC501)
HDMI SELECTOR VOLTAGES (IC701)
• 3.3V_HDMI
(From 3.3V_Normal through L701)
May 201 1 LCD TV 42LV5500