Connector Cable For Remote Display [Pac-Sa88Ha-E/Pac-725Ad-E] - Mitsubishi Electric M Series Manual

1. CONTROLS

1-10. Connector Cable for Remote Display [PAC-SA88HA-E/PAC-725AD-E]

Figure
Dimensions
<PAC-SA88HA-E>
<PAC-725AD>
Due to continuing improvement, above specification may be subject to change without notice.
82
Unit : mm
M-Series - Controls (December 2016)
Descriptions
• This adapter enables control of several units with a multiple
remote control display.
Applicable Models
SLZ-KA09/12/15NA
SEZ-KD09/12/15/18NA4
PKA-A12/18HA6
PKA-A24/30/36KA6
PCA-A24/30/36/42KA6
PLA-A12/18/24/30/36/42BA6
Specifications
Connecting cable to output status signal of the air condi-
Function
tioner, and ON/OFF by external (pulse) signal.
Pulse signal (no voltage instantaneous ON contact)
Input signal
Pulse duration 200m/s or more.
5P (connector to CN51 or CN52 on indoor unit control
Connector
board)
5-wire vinyl cable, for extension: sheathed vinyl cord or
Cable type
cable (0.5 to 1.25mm²)
Cable length 2m (max. 10m when extended locally)
Output capacity) DC12V 75mA (Max 0.9W)
10 pieces
PAC-SA88HA-E
PEA-A12/18AA6
PEAD-A24/30/36/42AA5
PVA-A30/36/42AA4
© 2016 Mitsubishi Electric US, Inc.