Scan To File - Brother DCP-110C Software User's Manual

Scan to File

When you select Scan to File you can scan a black and white or
colour document and send it directly to a PC you designate on your
network. The file will be saved in the folder and file format that you
have configured in the ControlCenter2.0 on the designated PC. You
can change the Scan configuration. (See File on page 3-11.)
For Network Scanning the ControlCenter2.0 selections are used
only for configuring the Scan button. You will not be able to
initiate a network scan from the ControlCenter2.0.
1
Load your document.
2
Press
3
Press or
▲
Scan to File .
Menu/Set
Press
4
Press or
▲
Menu/Set
Press
If the LCD prompts you to enter a Pin number, enter the 4-digit
Pin number for the destination PC on the control panel.
Mono Start
Press
The machine will start the scanning process.
7 - 8 NETWORK SCANNING
Scan
( ).
to select
▼
.
to select the destination PC you want to send to.
▼
.
Colour Start
or
Scan to File
.