Accessing The Scanner - Brother DCP-110C Software User's Manual

Scanning from a Macintosh
(not available for Mac OS
The Brother machine software includes a TWAIN Scanner driver for
®
Macintosh . You can use this Macintosh
with any applications that support the TWAIN specifications.
If you want to scan from the machine on a network, you must
select the networked machine. See Configuring Network
Scanning on page 8-21.

Accessing the scanner

Run your Macintosh
first time you use the Brother TWAIN driver, set it as the default by
choosing Select Source (or the other menu name to select the
device). Afterwards, for each document you scan choose Acquire
Image or Scan. The scanner setup dialog box will appear.
The screen shown in this section are from Mac OS
The screen on your Macintosh
operating system.
The method of selecting the source or choosing to scan may
vary depending on the application software you are using.
8 - 14 USING YOUR MACHINE WITH A MACINTOSH
®
TWAIN-compliant application software. The
®
®
®
8.6)
®
TWAIN Scanner driver
may vary depending on your
®
(Mac OS X 10.2.4)
®
®
X 10.2.4.