Node Name - Brother DCP-315CN Network User's Manual

Node Name

You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
(For MFC-425CN)
1 Menu/Set
Press
2 1
Select to change. Enter the Node Name.
3 Menu/Set
Press
4 Stop/Exit
Press
(For DCP-315CN)
1 Menu
Press
▲
2
Press or
Set
Press .
▲
3
Press or
Set
Press .
▲
4
Press or
Set
Press .
5
The Node Name will be displayed.
6 Stop/Exit
Press
DCP-315CN cannot change the Node Name from the control
panel menu, however the BRAdmin Professional utility
enables you to change the IP Address. (See Changing the IP
Address using the BRAdmin Professional utility on page 2-2.)
5 1 5
, , , .
.
.
.
▼
to select 3.LAN.
▼
to select 1.Setup TCP/IP.
▼
to select 5.Node Name.
.
FRONT PANEL SETUP 3 - 9