Special Function
There are some special functions that can be accessed by using the buttons on
the control panel as described below.
* * 1.
Turn the power switch off.
* * 2.
Turn the power switch on while holding down the Job cancel button.
* * 3.
Select the number of the following available functions by using the 10
numeric keys.
Key
1
2
3
4
5
6
LCD message
TEST PRINT
PRINT CONFIG
PRINT FONTS
HEX DUMP
FACTORY RESET
DRUM LIFE
1-47
Action
Print Test page
Print Configuration
Print fonts
Print the hexadecimal data
Restore to default settings
(Turn the Power switch on)
Indicates the remaining drum life