ABB Video kit Manual page 4

6 A B B - W E L C O M E V I D E O K I T
Mini Outdoor Station surface-mounted installation
1
Mounting screw x 4
Screw shaft: ∅4 mm
Screw length: ≥25 mm
Mini Outdoor Station flush-mounted installation
1
Mini Outdoor Station dismantle
1
Video Indoor Station 7 installation
2
1
2
3
2
3
Mounting screw x 4
Screw shaft: ∅4 mm
Screw length: ≥25 mm
2 2
Video Indoor Station 7 dismantle
M A N U A L
Mini Outdoor Station manages ID cards
Create the first admin card
If this mini outdoor station has not enrolled any card, unlock LED will flash green, orange and red in
sequence when it is powered on. To create the first admin card, you have 60s after powering on the OS to
swipe 1 time the card of your choice and unlock LED will light green if successfully. Notice that an admin
card is not a user card anymore and cannot serve to unlock the OS.
In the standby status, following functionalities can be implemented:
Function Command
Enroll user Swipe admin card 2x
Swipe user card 1x
Delete user Swipe admin card 3x
Swipe user card 1x
Open a door Swipe the enrolled ID card 1x
Reset Mini Outdoor Station to factory default
1. Disconnect the power supply
2. Set rotary switches of address to "0" and all the dip-switches to "OFF"
3. Connect the power supply
4. Long press the first button for 3 seconds
5. Unlock LED will flash green, orange and red in sequence if successfully
More information on the product manual
1. Go to the online webpage by scanning the QR code.
2. Click on the "Downloads" tab to find the documents.
Mini Outdoor Station
Service
For European Union conturies:
ABB S.p.A - Viale dell'Industria 18, 20010
Vittuone (MI), Italy
For Non-EU conturies:
ABB Xiamen Smart Technology Co., Ltd.
No. 881, FangShanXiEr Road, Xiang'An Industrial Area,
Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian 361000, China
7
Unlock LED
Flash orange 2 times and bip 1 time
Light green
Flash orange 3 times and bip 2 times
Light green
Light green
Video Indoor Station 7