Brother HL-4200CN Network User's Manual page 48

1
Select the Printer (LPR) option and click OK. You will then see the following
2
At this point we must select the correct PPD file for the printer and also configure the correct LPR
information. Click the Change button in the PostScript Printer Description (PPD) File section.
Insert the CD-ROM that contains the PPD file for the printer and select the appropriate PPD file.
3
Now select the Change button below the LPR Printer Selection text.
4
You must then enter the IP address and service name details of the printer. When specifying the
Queue, use the value BRN_xxxxxx_P1_AT where xxxxxx are the last 6 digits of the Ethernet
address.
If you do not specify the correct value the printer may not print, or it may not print the data correctly. Please
ensure that the value you enter here matches with the Service name of the printer.
5
Click OK to go back to the previous screen.
6
You are now ready to create the printer for use. To do that, click the Create button.
Figure 7-2Selecting the PPD and LPR Configuration
Figure 7-3Entering the IP address and Queue
APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 4