For Administrators; Setting Your Ip Address, Subnet Mask And Gateway (Using The Control Panel) - Brother HL-4200CN Quick Setup Manual

For Administrators

Setting your IP Address, Subnet Mask and
Gateway (Using the Control panel)
Your printer is configured to receive an IP address, Subnet mask and Gateway address from a DHCP
server. If you do not use a DHCP server follow the steps below.
Setting the IP Address Acquisition
Method to Control Panel.
1
MENU
1:System
2
Menu
5:Network
3
5:Network
Ethernet
4
5:Network
TCP/IP
5
TCP/IP
Setup IP Address
6
Setup IP Address
DHCP *
7
Setup IP Address
Panel
8
Reboot System
to take effect
Setup IP Address
Panel *
9
TCP/IP
Setup IP Address
Press .
Press 4 times.
Press .
Press .
Press .
Press .
Press
Press .
3 seconds later, an
asterisk appears.
Press .
Setting Your Printer IP Address.
Continued from the previous step.
TCP/IP
Setup IP Address
0
TCP/IP
IP Address
A
IP Address
000.000.000.000
B
IP Address
192.000.000.000
C
IP Address
192.000.000.000
D
IP Address
192.168.001.100
E
Reboot System
to take effect
IP Address
192.168.001.100*
F
TCP/IP
IP Address
Press .
Press .
Using or , set
the desired value (for
example 192).
Press and move
the cursor to the next
value.
B
Repeat Steps and
C
to finish setting
you IP address.
Press .
3 seconds later, an
asterisk appears.
Press .
35