For Administrators; Setting Your Ip Address, Subnet Mask And Gateway (Using The Control Panel) - Brother HL-8050N Quick Setup Manual
Brother hl-8050n: quick start
Hide thumbs
Also See for HL-8050N:
- User manual (216 pages) ,
- Network user's manual (134 pages) ,
- Service manual (8 pages)
Table of Contents
Advertisement
■ For Administrators
Setting your IP Address, Subnet Mask and
Gateway (Using the Control panel)
Your printer is configured to receive an IP address, Subnet mask and Gateway address from a DHCP
server. If you do not use a DHCP server follow the steps below.
1
2
-MENU-
NETWORK
3
NETWORK
TCP/IP
4
TCP/IP
IP ADDRESS=
5
IP ADDRESS=
0.
0.
0.
0*
6
IP ADDRESS=
192.
0.
0.
0
7
IP ADDRESS=
192.
0.
0.
0
8
IP ADDRESS=
192.168.001.100
9
IP ADDRESS=
192.168.001.100*
Press
until
NETWORK=
is
displayed.
.
Press
.
Press
again
Press
until
IP
ADDRESS=
is displayed.
.
Press
Enter the IP address for
this printer using
or
.
(for example 192)
Press
and move
the cursor to the next
value.
Repeat Steps
6
and
7
to finish setting the IP
address.
Press
to complete
the IP address.
An asterisk mark (*)
.
appears on the LCD
0
TCP/IP
SUBNET MASK=
A
SUBNET MASK=
0.
0.
0.
0*
B
SUBNET MASK=
255.255.255.000*
C
TCP/IP
GATEWAY=
D
GATEWAY=
0.
0.
0.
0*
E
GATEWAY=
192.168.001.254*
F
READY
Press
until
SUBNET MASK=
is
displayed.
Press
.
Set your subnet mask in
the same way as the IP
address.
An asterisk mark (*)
appears on the LCD.
Press
until
GATEWAY=
is
displayed.
Press
.
Set your gateway
address in the same way
as the IP address.
An asterisk mark (*)
appears on the LCD.
Press
to put the
printer back into its
READY.
37
Advertisement
Table of Contents
