Setting Up Your Printer; Install The Toner Cartridge - Brother HL-8050N Quick Setup Manual

Step 1
1

Install the Toner Cartridge

Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Remove all the packing tape.
2
Open the top cover.
Do not touch any parts inside the
printer.
3
Take the toner cartridge out of the box and
rock it 7 to 8 times.
12

Setting Up Your Printer

Top cover
Toner cartridge
4
Place the toner cartridge on a flat surface
and pull the seal out horizontally.
■ When pulling out the seal, pull it out
horizontally. The tape might break if it is
pulled out diagonally.
■ After the seal has been pulled out, do not
shake or bump the toner cartridge.
5
Hold the toner cartridge by the grip and
insert it into the slot inside the printer.
Make sure that the toner cartridge is firmly
set.
6
Close the top cover securely.
Seal