Using Arp To Configure The Print Server Ip Address - Brother HL-8050N Network User's Manual

Using ARP to Configure the Print Server IP
Address
If you are unable to use the BRAdmin application or the printer's
control panel and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on
®
Windows systems that have TCP/IP installed as well as Unix
systems. To use arp enter the following command at the command
prompt:
arp -s ipaddress ethernetaddress
Where ethernetaddress is the Ethernet address (MAC address)
of the print server and ipaddress is the IP address of the print
server. For example:
®
Windows Unix/Linux Systems
Tipically, Windows
character between each digit of the Ethernet address.
arp -s 192.189.207.2 00-80-77-31-01-07
®
Unix and Linux Systems require the hash "-"
TCP/IP CONFIGURATION 10 - 6