Brother HL-8050N Network User's Manual page 55

9
You will then be asked to enter the port settings for the remote
print server:
Enter any unique legal Internet E-mail address for the remote
print server (for example emailprinter@xyz.com). Note that
Internet E-mail addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP
E-mail server (consult your network administrator if you do not
know this address). Also specify if you are going to use the
Partial E-mail Print option and the Notification type.
10
Press OK to continue. You will then be asked to re-start your
computer.
11
Once your computer has re-started you must create a printer on
your Windows
system using the standard Windows
Windows NT
Start button, select Settings and then Printers.
12
Select Add Printer to begin the printer installation.
13
Click Next when you get the Add Printer Wizard window.
<For Windows
14
Select Local Printer when you are asked how the printers are
connected to your computer and push Next.
<For Windows NT
14
Select Local Printer when you are asked how the printer is
connected to your computer, and then push Next.
<For Windows
15
Select the desired model of the remote printer (for example,
Brother HL-series). If necessary, click Have Disk to load the
driver from the CD-ROM. Click Next when you are done.
16
If you have selected a printer driver that is already being used, you
have the option of either keeping the existing driver (recommended)
or replacing it. Select the desired option and press Next.
CONFIGURING INTERNET PRINTING FOR WINDOWS
®
95/98/Me/2000/XP and Windows NT
®
4.0 printer setup procedure. To do this, go the
®
95/98/Me users>
®
4.0 and Windows
®
95/98/Me users>
®
95/98/Me/2000/XP and
®
2000/XP users>
®
4.0
®
5 - 8