Brother P-touch QL-1050 Software User's Manual page 55

Roll Setting
Settings
Length
Margin
Auto Tape cut (other than the
QL-500)
Cut at every xx labels
(QL-1050/1050N)
Cut at end (QL-650TD/1050/
1050N)
Mirror Printing
Give Priority to
print speed
Quality
Give priority to
print quality
Halftone/Color
Specifies halftone, brightness and contrast.
P-touch Editor
Numbering: Specifies the increment when numbering
the labels (serial numbers).
Specifies the length of the tape.
Specifies the left and right margins of the tape.
When checked, the printed labels are automatically cut after printing.
You can also set the number of labels between cuts.
When unchecked, the printed labels are not automatically cut after printing.
Cut the label by pressing the CUT button.
When multiple labels are printed, only cuts after the final label is printed.
Prints a mirror image of the label. Use this option to create labels that can
be applied to the inner surface of glass, etc. Use clear tape when creating
such labels.
Use this option to give priority to printing speed.
Use this option to give priority to print quality.
55
Printing the Label
Details