Brother 1240 Service Manual page 108

(6) Turn the main frame upside down.
(7) Remove the two M3x6 Taptite screws and release the solenoid harness from the hook and
remove the cassette guide L/F.
Step (7)
Taptite, cup M3x6
(8) Remove the M3x4 screw and the tape on the solenoid harness and remove the solenoid
ASSY.
!
CAUTION:
When removing the solenoid, the solenoid rod and spring may come off. Be careful not to lose
them. (Refer to the figure above.)
Fig. 4-61
Tape
Main frame
Fig. 4-62
4-35
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Cassette guide L/F
Spring
Rod
Solenoid ASSY
Screw, bind M3x4