Brother DCP-115C User Manual page 97

Main Menu Submenu
3.LAN 1.TCP/IP
(Wired)
(DCP-340CW
only)
2.TCP/IP
(WLAN)
The factory settings are shown in Bold.
Menu Options
Selections
1.BOOT Auto
Method
Static
RARP
BOOTP
DHCP
[000-255].
2.IP Address
[000-255].
[000-255].
[000-255]
[000-255].
3.Subnet
Mask [000-255].
[000-255].
[000-255]
[000-255].
4.Gateway
[000-255].
[000-255].
[000-255]
5.Node Name BRN_XXXXXX
6.WINS Auto
Config
Static
7.WINS (Primary)
Server 000.000.000.000
(Secondary)
000.000.000.000
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
9.APIPA On
Off
1.BOOT Auto
Method
Static
RARP
BOOTP
DHCP
[000-255].
2.IP Address
[000-255].
[000-255].
[000-255]
[000-255].
3.Subnet
[000-255].
Mask
[000-255].
[000-255]
Descriptions
You can choose the
BOOT method that
best suits you needs.
Enter the IP address.
Enter the Subnet
mask.
Enter the Gateway
address.
Enter the Node
name.
You can choose the
WINS configuration
mode.
Specifies the IP
address of the
primary or secondary
server.
Specifies the IP
address of the
primary or secondary
server.
Automatically
allocates the IP
address from the
link-local address
range.
You can choose the
BOOT method that
best suits you needs.
Enter the IP address
Enter the Subnet
mask.
APPENDIX A - 7
Page
See
Network
User's
Guide
on the
CD-ROM