Document Size - Brother LX-1200 Owner's Manual

Document Size

The size of the document that you wish to laminate should not be larger (or smaller) than the width that your
machine can accommodate. The document should be between 2.0 and 11.7 inches (50 and 297 mm) wide.
The minimum paper length should be 3.5 inches (90 mm). The paper thickness should be between 17 lbs.
to 40 lbs. (0.004" and 0.008"). Only one document at a time can be loaded onto the document tray.
Type of cartridge
Paper width Maximum
Minimum
Paper length Minimum
Paper thickness
Business card-size paper should be inserted vertically into the machine as illustrated below.
Note
If you place a small document into the machine incorrectly, it can be removed by lifting the document
tray cover as illustrated.
When laminating a document longer than 18.5" (470 mm), the machine will pause after laminating 18.5". To
continue the process just press the Start button.
CAUTION:
Do not insert documents that are curled, wrinkled, folded or ripped into the machine. Documents
must be free of staples, paper clips, glue, correction fluid and sticky tape. Do not insert fabric
material into the machine.
12.0 inch cartridge
11.7" (297 mm)
2.0" (50 mm)
3.5" (90 mm)
0.004" - 0.008"
- 14 -
9.0 inch cartridge
8.5" (216 mm)
2.0" (50 mm)
3.5" (90 mm)
0.004" - 0.008"
4.8 inch cartridge
4.3" (108 mm)
2.0" (50 mm)
3.5" (90 mm)
0.004" - 0.008"