Control Panel; Film Cartridge - Brother LX-1200 Owner's Manual

Control Panel

POWER DIAL ON/OFF
Cut
Feed
Continuous
Extra Border
Start
Stop
Border
No Border
Cutter Off
Error
Cut button
Error
Error
indicator
Feed button

Film Cartridge

Cutting line
Shutter
Shutter buttons
Film slit
Shutter buttons
Film slit
Turns the machine on/off.
Cuts the document in the current position.
Manually feeds the laminate and/or the document.
Use this feature to laminate multiple documents.
Use this feature to create an extra border on one-side of your
document (i.e. area for 3-hole punch).
Starts an operation.
Stops an operation.
The machine will trim the film with about a 0.18" (4.5mm) margin
from each edge of the document. - Leaves a margin of laminate.
The machine will trim the film with a margin that is approximately
0.06" (1.5mm) from each edge of the document. - Trims the
laminate close to the document.
Turns the cutting mode off.
Indicates a malfunction of machine.
Continuous button
Stop
Cut Continuous
Feed Extra Border
Extra Border button
Engraved on the outside of the cartridge, use as a guide to cut
the excess film before installing the cartridge into the machine.
Lift the shutter upward to open the film cartridge cover.
Locks the film cartridge cover and returns the shutter to the
original position.
The top edge of film appears from this film slit.
Shutter
Cutting line
Start button
POWER DIAL
POWER
ON OFF
Start
Cutter Off
Stop button
Optional Film Refills
Plastic side holder
- 9 -
ON
Border
No Border