Control Panel; Film Cartridge - Brother LX-900 Owner's Manual

Control Panel

POWER SWITCH On/Off
(cut button)
Feed
Start/Stop
Auto Cut Mode selector switch
- Border
- No Border
-Off

Film Cartridge

Cutting line
Shutter
Shutter button
Film slit
Cutting line
Shutter
Turns the machine on/off.
Cuts the document in the current position.
Use to feed the document manually.
Use this button to start or stop an operation.
The green LED indicates that the machine has power, and is
turned on.
The machine will cut the film with about a 0.18" (4.5mm) margin
from each edge of the document.
- Leaves an extra margin of laminate.
The machine will cut the film with a margin that is approximately
0.06" (1.5mm) from each edge of the document.
- Trims the laminate close to the document.
Turns the cutting mode off.
Cuts the excess film on this line to install the cartridge properly.
Lifts the shutter upward to open the film cartridge cover.
Locks the film cartridge cover and returns the shutter to original
position.
The top edge of film appears from this film slit.
Film slit
Shutter button
- 8 -
Power switch
Cut button
Feed button
Start/Stop button
Auto Cut Mode
Selector switch
Optional Film Refills
Plastic side holder
Projection