Functions - Motorola 592HSMTB User Manual

IV. Functions
The display panel is designed on the fridge door, illustrated as the figures below:
Function Setting
When the refrigerator system is connected to the power supply for the first time, all icons on the display panel get
illuminated for 2s, and the system runs in the Smart mode by default. When all the doors are closed, the display
goes off automatically if no key operation is there within 3 minutes. When the display is off, it will light up if any
door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and get illuminated on the display.
"Inverter" is the frequency conversion indicator. When the power is turned on, it lights up when the compressor is
working.
1.Functions
1.1 Temp. setting
1）Fridge temperature setting
Press the Temp. Zone key to select the fridge zone until the corresponding icon gets flickering, and then press
the Temp. key to set the temperature as desired, finally, press the OK key or wait for 5s to validate the setting.
The fridge temperature setting cycles as follows:
5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
OF indicates the fridge is switched off, and when the OF function takes effect, the fridge will stop cooling.
Be sure to take all foods out of the fridge compartment before setting this function.
2）Freezer temperature setting
Press the Temp. Zone key to select the freezer zone until the corresponding icon gets flickering, and then press
the Temp. key to set the temperature as desired, finally press the OK key or wait for 5s to validate the setting.
The freezer temperature setting cycles as follows:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃
1.2 Fast Freeze
1) When the Fast Freeze function is enabled, the freezer temperature will be controlled at -32℃ automatically, and
after 26 hours of running, the Fast Freeze function gets exited. Cooling down the freezer temperature in a rapid
manner is beneficial to the loss of prevention of food nutrition and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
2) Enabling the Fast-Freezing function
Press the Function key to select Fast Freeze until the corresponding icon gets flickering, and then press the OK
◆
key within 5s for confirmation. If the OK key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function
After a cumulative running period of 26 hours, the Fast Freeze function will exit automatically.
◆
Under the Fast Freeze mode, press the Function key to select Fast Freeze until the corresponding icon gets
◆
flickering, and then press the OK key for confirmation, the Fast Freeze function will get exited.
When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
◆
7
7