Advertisement
4.14
to raise and lock the sides of the truck lift one end-piece first
and move the locking handle (see fig.4-B) into the vertical
position. raise the adjacent side-piece so that the locking
handle passes through the slotted tongue on the side-piece.
now swing the handle downwards to lock the side-piece in
position (see fig.5). repeat the process for all four corners
so that the truck is assembled as shown in fig.6.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImportaNt: no liability is accepted for incorrect use of this product.
WarraNtY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INformatIoN: for a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
fig.3
5. truck opEratIoN
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
fig.4
Sole uk Distributor
Sealey Group,
Bury st. Edmunds, suffolk.
check tyre pressures on the truck on a regular basis. Do not
inflate above 30psi.
Do not overload the truck and ensure that the load is evenly
distributed before setting off.
When towing the truck proceed at a safe speed especially at
corners where there could be a danger of the load shifting.
When using as a flat bed truck do not transport loads with an
excessive overhang.
Extra care should be taken on inclined surfaces.
If the truck is loaded and left unattended the wheels should
be chocked.
Where there is a curb or step a ramp should be used.
When using as a flat bed truck remove all sides so as not to
restrict the turning circle.
01284 757500
01284 703534
fig.5
fig.6
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
cst997.V2 Issue: 1 - 18/01/09
Advertisement
