Motorola 80FLIWBM5DG User Manual page 13

INSTALLATION INSTRUCTIONS
Connecting the Supply Hose
1. Check that sealing washers are firmly seated.
2. Attach the curved end of the hose to the inlet valve of the washing
machine, tighten the coupling nuts securely by hand.
3. Attach straight end of the hose to the tap. Tighten the coupling nuts
securely by hand.
4. Turn on the taps and check for leaks. Tighten the coupling nuts firmly if
there is any leakage. If water pressure is strong, close the water tap
completely then open it slightly.
CAUTIONS:
• Do not use water which is hotter than 50°C.
• If your faucet is not suitable, please contact Brand authorised service
help desk.
Installing Water Supply Hose to the Washer
Turn the nut clockwise till the nut turned tight while holding the hose.
Turn the nut counter clockwise after turning the faucet off when you want
to detach the water supply hose.
12