Motorola 80FLIWBM5DG User Manual page 33

CLEAN AND MAINTENANCE
Machine gets frozen
1. Using hot towel to envelop the water tap and connector.
2. Disassemble the inlet pipe and put it into hot 50 degree hot water.
3. Put 2-3 liter 50 degree hot water into tub.
4. Assemble the inlet pipe again, open the water tap and start the machine.
At last, please examine whether the inlet pipe and drainpipe can work
normally.
CLEAN FILTER OF PUMP (ONE TIME MONTHLY SUGGESTION)
1. Press the groove of pump.
The cover of filter can be opened.
(Attention: If there is hot water in the machine, please wait for cooling and
then open the filter.)
2. Take out the filter anticlockwise.
3. Wash the filter with water.
4. Assemble the filter into the pump clockwise.
Attention: 1. The filter should be assembled tightly in order to avoid water
leakage.
2. Please don't clean the filter when the machine is working.
32