AEG AHB520E1LW User Manual page 25

3.1 Dimensions
W1
H1
W2
Overall dimensions
H1 mm
W1 mm
D1 mm
1) the width, height and depth of the appliance
without the handle and feet
Space required in use
H2 mm
W2 mm
D2 mm
1) the height, width and depth of the appliance in‐
cluding the handle, plus the space necessary for
free circulation of the cooling air
Overall space required in use
H3 mm
W2 mm
H2
D1
85°
H3
D2
1)
845
905
545
1)
945
1105
695
1)
1385
1105
Overall space required in use
D2 mm
1) the height, width and depth of the appliance in‐
cluding the handle, plus the space necessary for
free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum
angle permitting removal of all internal equipment
3.2 Location
The appliance should be installed well
away from any sources of heat, such as
radiators, boilers, direct sunlight, etc.
• Place the appliance in a horizontal
position on a solid surface.
• Make sure that the appliance stands
level.
This can be achieved by two
adjustable feet at the bottom on the
left side of the appliance. Unscrew the
feet anticlockwise to set them higher.
• To achieve the best performance, do
not place the appliance below
overhanging wall units.
• Make sure the air can circulate freely
around the appliance.
If, due to different installation, proper
ventilation requirements are not
respected, the appliance will function
ENGLISH 25
1)
695