Brother Network MFC-7840W Network User's Manual page 89

d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose DNS Server.
Press OK.
f
Press a or b to choose Primary or Secondary.
Press OK.
g
Press 1 to choose Change.
h
Enter the DNS Server address.
Press OK.
i
Press Stop/Exit.
APIPA
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see BOOT Method on page 74). Choosing Off means the IP address doesn't change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
(For Wired) Press a or b to choose Wired.
(For Wireless) Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose TCP/IP.
Press OK.
e
Press a or b to choose APIPA.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Control panel setup
6
6
80