Wired Enable (Wired Network Only); Wlan Enable (Wireless Network Only) - Brother Network MFC-7840W Network User's Manual

Wired Enable (wired network only)

If you want to use the wired network connection, set Wired Enable to On.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Wired.
Press OK.
d
Press a or b to choose Wired Enable.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.

WLAN Enable (wireless network only)

If you want to use the wireless network connection, set WLAN Enable to On.
Note
If the network cable is connected to your machine, set Wired Enable to Off.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Enable.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
Control panel setup
6
6
6
85