Mitsubishi Electric MA-E100R-E Service Manual page 31

(2) Removing and Replacing the HEPA Filter and Two Activated Charcoal Filters
1 Remove the inlet panel and two pre-filters.
→ (See "(1) Removing the Inlet Panel and
Two Pre-filters".)
2 Hold the tag on the upper part of the HEPA
filter and remove it.
→ (Removing and Replacing the HEPA Filter)
3 Hold the knob on the upper part of the two
activated charcoal filters and remove them.
→ (Removing and Replacing the Two
Activated Charcoal Filters)
Knob
Activated charcoal filter
Knob
Activated charcoal filter
3
3
2
HEPA filter
2
Tag
3
Activated charcoal filter
31
HEPA filter