Brother PCL Technical Reference Manual page 231

Variables
THICKPRDLY
BONDPRDLY
FLICKER MODE
APPLEUSBPS
DX1JOB1PAGE
AUTOONLINE
BUTTONREPEAT
MESSAGESCROLL
ERRORBUZZER
PANELBUZZER
BUZZERVOLUME
CARBONMODE
CARBONCOPIES
CARBON1TRAY
CARBON2TRAY
CARBON3TRAY
CARBON4TRAY
Description
Sets Postscript Pure Binary Printing
from Macintosh via USB.
Sets 1JOB1PAGE Printing mode.
As for HL-6050 series, supported ROM
version is 1.18 or later.
Sets auto return function from setting
Panel mode to Ready mode.
Sets key repeating speed in Panel mode.
Sets scrolling time at Scroll message.
Sets Buzzer mode at Error condition.
Sets Buzzer mode for Panel Operation.
Sets Buzzer volume.
Sets Carbon mode
Set the number of Carbon copies.
Select input tray for the first page.
Select input tray for the second page.
Select input tray for the third page.
Select input tray for the fourth page.
CHAPTER 5 PJL - 33
Sample Value Range
OFF, SHORT, NORMAL, LONG
(HL-2460/7050)
OFF, SHORT, NORMAL, LONG
(HL-2460/7050)
0 to 63 (HL-2460/7050)
ON, OFF (HL-1850/1870N/5040/
5050/5070N/5140/5150D/
5170DN/5240/5250DN/5270DN/
5280DW)
SIMPLEX, DUPLEX (HL-1850/
1870N/5040/5050/5070N/5140/
5150D/5170DN/6050/6050D/
6050DN/8050N/5250DN/5270D
N/5280DW)
ON, OFF (HL-7050/6050/6050D/
6050DN/5270DN/5280DW)
BUTTON100MSEC,
BUTTON200MSEC,
BUTTON300MSEC,
BUTTON400MSEC,
BUTTON500MSEC,
BUTTON1000MSEC,
BUTTON1500MSEC,
BUTTON2000MSEC (HL-7050/
6050/6050D/6050DN/5270DN/52
80DW)
1-10 (HL-7050/6050/6050D/
6050DN/5270DN/5280DW)
OFF, ON (HL-7050/6050/6050D/
6050DN)
OFF, ON (HL-7050/6050/6050D/
6050DN)
LOW, HIGH (HL-7050/6050/
6050D/6050DN)
OFF, ON, AUTO, PARALLEL
(HL-
6050/6050D/6050DN/5270DN/52
80DW)
1-8 (HL-
6050/6050D/6050DN/5270DN/52
80DW)
REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
REMAINING, MP, TRAY1,
TRAY2 (If available) (HL-6050/
6050D/6050DN/5270DN/5280D
W)
2006/05/31