Introduction; Command Reference List; Pjl Output Tray; Pcl Output Tray - Brother PCL Technical Reference Manual

1.

INTRODUCTION

This manual covers the general specifications and the command reference list of the FS-5050 Finisher/Stapler
units, which are optionally installed onto the HL-3260 printer.
2. GENERAL SPECIFICATION
The Finisher/Stapler unit is an option for the HL-3260 printer.
Function
Finisher/
Stapler
3.

COMMAND REFERENCE LIST

This section describes the specific commands as listed below used to support the functions of the
Finisher/Stapler unit.

1) PJL output tray

2) PCL output tray

3) PS output tray
4) PJL staple on/off
5) PS staple on/off
6) PJL job offset on/off
7) PS job offset on/off
8) PCL job separate
For the details on each command, refer to the following sections.
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 3
Printed pages can be sorted or stapled.
Description
2006/05/31