Adjusting The Tone (White Balance) - Canon Powershot SD890 IS DIGITAL ELPH User Manual

104
Use the LCD monitor to confirm that the image was recorded
at the desired brightness.
Please note that camera shake becomes a factor at low
shutter speeds. Shoot with the camera attached to a tripod.
Use of the flash may result in an over-exposed image. If this
occurs, shoot with the flash set to

Adjusting the Tone (White Balance)

Normally, the
balance. When the
change the white balance using a setting appropriate for the light
source.
Auto
Day Light
Cloudy
Tungsten
Fluorescent
Fluorescent H
Custom
1
Select a white balance
setting.
1. Press the
2. Use the
and the
the option.
3. Press the
Available Shooting Modes
(Auto) white balance setting selects an optimal white
setting cannot produce natural looking colors,
Settings are automatically set by the camera.
For recording outdoors on a bright day.
For recording under overcast, shady or twilight skies.
For recording under tungsten and bulb-type 3-
wavelength fluorescent lighting.
For recording under warm-white, cool-white or
warm-white (3-wavelength) fluorescent lighting.
For recording under daylight fluorescent, or daylight
fluorescent-type 3-wavelength fluorescent lighting.
For recording with the optimal white balance data
memorized in the camera from a white-colored
object, such as white paper or cloth.
button.
or button to select
or button to change
button.
.
p. 238