To Shoot Images In Focus - Canon Powershot SD890 IS DIGITAL ELPH User Manual

5.
Press the shutter button fully (all the way) to shoot.
• The shutter sound will play once and the image will record.
• Recorded images are displayed on the LCD monitor for
approximately 2 seconds immediately after shooting (Rec.
Review). You can shoot by pressing the shutter button even
when an image is being displayed.
• If you hold the shutter button down after a shot, the image will
continue to display.
• The indicator will blink green and the file will record to the
memory card.

To Shoot Images in Focus

The camera automatically sets the focus when you press the shutter
button halfway*.
* The shutter button has a two-stage action. Pressing it down to the first stage is
referred as "pressing halfway".
Press halfway to set
the focus
Shooting Preparations
Complete: Lights green
(orange when the flash will fire)
Mute Setting
Pressing the DISP. button while turning on the camera power will
silence all camera sounds except for warning sounds. You can
change the setting in [Mute] in the
Correct
Press fully
Beep,
beep...
Recording:
Blinks green
AF Frame
An AF frame will
display in green on
the LCD monitor at
the point of focus.
Shooting Still Images
Just pressing fully
(Set up) menu (p. 57).
17
Incorrect