Siemens Cerberus PACE Compact Operation Manual page 32

8 Desk call station (19 buttons) PT2001-A1
Operation PT2001-A1
32 | 54
Record an announcement
1. Press and hold the relevant labeled button to start the recording.
 The microphone is activated.
2. Talk into the microphone at a normal sound level.
 The announcement is recorded in the device's internal memory.
3. Release the relevant labeled button to stop the recording
Play back and listen to a recorded announcement
◈
Press the relevant labeled button.
 The recorded announcement is played back on the internal speaker.
Delete recorded announcements
◈
A new recording deletes the previous recorded announcement. Only one
recorded announcement is possible.
Or
◈
Disconnect the call station from the power supply.
 Recorded voice messages are deleted from the device's internal memory.
Reset a fault message
 LED 'FAULT' lights up.
◈
Press the button labeled <RESET>.
 LED 'FAULT' turns off.
 The fault in the system has been rectified.
 The fault message is reset.
Recur fault messages
 The LED 'FAULT' lights up again.
 The fault in the system has not been rectified.
◈
Inform Siemens customer support.
 Request that maintenance be carried out by technical personnel.
A6V11899865_en--_b