Table of Contents
Advertisement
Chassis name
TPS19.1E LA
Published by Doris.zheng/SC 1926 Quality
2019
TP Vision Netherlands B.V.
©
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS' Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Platform
MSD92L
Subject to modification
TPS19.1E
Model name
22PFS5304/60
24PHS4304/12
24PHS4304/60
24PHS4354/12
24PHT4304/05
24PHT4354/05
32PHS4503/12
32PHS4504/12
32PHT4503/12
32PHT4504/05
43PFS5503/12
43PFT5503/12
EU
3122 785 20931
2019-Jun-28
Advertisement
Table of Contents
Related Manuals for Philips 22PFS5304/60
Summary of Contents for Philips 22PFS5304/60
- Page 1 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
- Page 2 Koninklijke Philips Electronics N.V. or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
- Page 3 Product information is subject to change without notice. detailed product information, please visit For 24PHx43x4 www.philips.com/support TV Rear - HDMI 1 ARC: HDMI Audio Return Channel - HDMI 2 Display Input Resolution - DIGITAL AUDIO OUT: SPDIF - VGA For PHx series TV - AUDIO IN (DVI/VGA): Stereo 3.5mm mini-jack...
- Page 4 mode, LNB current 300mA max * Only for DVB-T2, DVB-S2 Display Type Diagonal screen size Sound • 55 cm / 22 inch • • 60 cm / 24 inch Output power (RMS) : • 80 cm / 32 inch 24” series: 6W •...
- Page 5 4. Switch “off” the set, and remove the wire between the to the diversity tables for the correct values. • The correct component values are listed on the Philips two pins of the Mains/AC Power plug. • Check the cabinet for defects, to prevent touching of any Spare Parts Web Portal.
- Page 6 • Mix of lead-free soldering tin/parts with leaded soldering tin/parts is possible but PHILIPS recommends strongly to avoid mixed regimes. If this cannot be avoided, carefully clear the solder-joint from old tin and re-solder with new tin.
- Page 7 • Always respect voltages. While some may not be originating from the USA and used e.g. in dangerous in themselves, they can cause unexpected LATAM and AP-NTSC countries reactions that are best avoided. Before reaching into a B-TXT Blue TeleteXT powered TV set, it is best to test the high voltage Centre channel (audio) insulation.
- Page 8 G-TXT Green TeleteXT distance is 6.5 MHz. L' is Band I, L is all H_sync to the module bands except for Band I High Definition LG.Philips LCD (supplier) Hard Disk Drive Loudspeaker HDCP High-bandwidth Digital Content Protection: LVDS Low Voltage Differential Signalling A “key”...
- Page 9 Serial Peripheral Interface bus; a 4-wire module, implementing the CA system for a synchronous serial data link standard host (e.g. a TV-set) S/PDIF Sony Philips Digital InterFace Power On Reset, signal to reset the uP SRAM Static RAM PSDL Power Supply for Direct view LED...
- Page 10 Thin Film Transistor toward external amplifier Total Harmonic Distortion Vestigial Side Band; modulation method TMDS Transmission Minimized Differential WYSIWYR What You See Is What You Record: record Signalling selection that follows main picture and Transport Stream sound TeleteXT WXGA 1280 × 768 (15:9) TXT-DW Dual Window with TeleteXT XTAL...
- Page 11 3. Mechanical Instructions 3.1 Cable Dressing ECN408 ECN701 CN408 CN701 CN9101 CN8605 CN401 ECN8605 SSB (1053) MAIN POWER SUPPLY (1054) CN601 ECN401 IR/LED BOARD (1056) Cable dressing (24" series) ECN601 ECN601 LOUDSPEAKER LOUDSPEAKER (1184) (1184) Back cover overview (24" series)
- Page 12 CN9901 M+P BOARD (1052) CN601 CN401 CN408 CN8602 ECN408 Cable dressing (32" series) ECN408 CN8602 CN408 CN9901 M+P BOARD (1052) CN601 CN401 ECN408 Cable dressing (43" series)
- Page 13 ECN601 ECN401 to key&IR LOUDSPEAKER KEY BOARD LOUDSPEAKER (1184) (1057) (1184) IR/LED BOARD (1056) Back cover overview (32" & 43” series)
- Page 14 3.2 Assembly/Panel Removal 3.2.1 Stand removal Notes: Figures below can deviate slightly from the actual situation due to the different set executions. Remove the fixation screws [1] that secure the stand. Take the stand bracket out from the set. (22"/24" series) (32"&43"...
- Page 15 (22"/24" series)
- Page 16 32” 4503, 43/50” 5503 Series: Remove all fixation screws [2] and [3] that secure the Back cover assy. Unplug the connector [2] that marked by red box below from SSB. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set. (32"&43"...
- Page 17 32” 4503/4504, 43” 5503 Series: Unplug the connector from the SSB. Caution: be careful, as these are very fragile connectors! Remove all the fixation screws [1] and connector [2] from the IR board control unit. Remove the IR lens, IR board from the DECO_REAR_COVER. When defective, replace the whole unit.
- Page 18 3.2.5 Power Supply Unit (PSU) Caution: it is mandatory to remount all different screws at their original position during re-assembly. Failure to do so may result in damaging the PSU. Gently unplug all connectors from the PSU. Remove all fixation screws from the PSU. The PSU can be taken out of the set now.
- Page 19 4. Service Modes 4.1 Service Modes The Service Mode feature is split into following parts: Service Alignment Mode (SAM). Factory Mode. Customer Service Mode (CSM).SAM and the Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. ...
- Page 20 With the “LEFT/RIGHT” keys, it is possible to: – (De) activate the selected menu item. – (De) activate the selected sub menu. – Change the value of the selected menu item. When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the ...
- Page 21 4.3 Factory mode: Purpose To perform extended alignments. Specifications Displaying and or changing Panel ID information. Displaying and or changing Tuner ID information. Error buffer clearing. Various software alignment settings. Testpattern displaying. Public Broadcasting Service password Reset. ...
- Page 22 (32"&43" series) How to Exit the Factory mode Use one of the following methods: Select EXIT_FACTORY from the menu and press the “OK” button. Note: When the TV is switched “off” by a power interrupt, or normal switch to “stand-by” while in the factory mode, the TV will show up in “normal operation mode”...
- Page 23 CSM Overview How to Navigate By means of the “CURSOR-DOWN/UP” knob (or the scroll wheel) on the RC-transmitter, can be navigated through the menus. How to Exit CSM To exit CSM, use one of the following methods. Press the MENU/HOME button on the remote control transmitter. ...
- Page 24 5. Software Upgrading, Error code and Panel Code 5.1.1. The following update is for .pkg file. Rename the file to “upgrade_loader.pkg”. Prepare a USB memory (File format: FLAT, Size: 1G~8G). Copy the software to USB flash disk (root directory). Switch off the TV and Insert the USB memory stick that contains the software update files in one of the TV’s USB 2.0 port. Switch on the TV.
- Page 25 Upgrade in progress. After software upgrade complete, select [Restart] to reboot TV. Step 3: Check the SW version After burning software, TV will restart. Press “123654”, enter Customer Service Mode to check if the software version is correct. Caution: Please make sure that software upgrade is finished before unplug the USB and AC power!
- Page 26 5.1 Error Code 5.2.1 Introduction Error codes are required to indicate failures in the TV set. In principle a unique error code is available for every: • Activated (SW) protection. • Failing I2C device. • General I2C error. The last five errors, stored in the NVM, are shown in the Service menu’s. This is called the error buffer. The error code buffer contains all errors detected since the last time the buffer was erased.
- Page 27 Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the panel type: see column “Display Code” in below tab. After resetting the Display Code, restart the set immediately. CTN_ALT BOM# Panel Type Display Code 22PFS5304/60 TPT215WF1-HVN01.U 102C 24PHS4304/12 TPM236WH2-WHBN00.K 5947 24PHS4304/12 TPM236WH2-WHBN00.K S5941C...
- Page 28 Trouble shooting 2016年12月10日 2016/4/8 Picture-related Intermittent Ask Photo Picture ? problem ? Menu Smarkt Signal SW latest ? Backlight? issue function? issue SSB+LVDS+Panel Update SW LED working ? PSU/SSB Problem solved ? Sound ? PSU+ Panel Finish SW+SSB...
- Page 29 Trouble shooting 2016年12月10日 2016/4/8 Audio/Sound- related Intermittent Sound ? problem ? Setting SW latest ? Mute ? issue issue Update SW Extra device Check extra connect? device Problem solved ? Factory setting Finish Sound back ? Setting issue SSB+SPK...
- Page 30 6.Slow response to user interaction 7.Switches ON by itself 8.Switches Off by itself 9.Stuck in standby mode / unable to start up 10.Stuck on PHILIPS / ANDROID logo 11.CAM not recognized by TV 12.CAM authentication issue 13.Misc CAM issue 14.IP-EPG issues 15.BC-EPG issues...
- Page 31 Electrical Diagram Block diagram...
- Page 32 7.2 Power Supply Power architecture of this platform: AUDIO LVDS Platform power Display power ON/OFF CN8605 for 715G7735P PS_ON Platform CN8602 12V_A MSD92L 5V_STB CN701 AC-input + Main filter AC IN 7.3 Power tree Power Board System Supply +12V_Normal/ 20.6W/ 1722mA Power Board Audio Supply +12V_Audio/ 10W/ 925mA Q701 +12V_Normal...
- Page 33 Power Board System Supply +12V_Normal/ 20.6W/ 1722mA Power Board Audio Supply +12V_Audio/ 10W/ 925mA Q701 +12V_Normal U701 MOSFET MTP2317N3 -5.8A -20V +5V_Standby +5V_Normal U703 +1.5V_DDR DC/DC RT6206BHGSP 5.5A 18V SOP-8 5.8A LDO AZ1117CD-ADJTRG1 1A adj TO-252 12V/11.6W/972mA 2100mA 1575mA 200mA Max.
- Page 34 Power SSB Bottom View...
- Page 35 8. IC Data Sheets 8.1 AD87010-LG48NRY (IC U601)
- Page 36 8.2 TDSY-G430D (TU101)
- Page 37 9.Circuit Diagrams 9.1 A 715G7735 PSU (For 24” 5603 Series) 9-1-1 POWER BD9901 36W: BD9901 093G 50460518 KBP208G-C 45W: BD9901 393G0050460A02 36W: L8601 373G0253214X02 45W: L8602 073G 253214 Cold R8612 C8605 L8601 NC/22K 1% NC/100PF 500V NC/47UH FB9903 FB9906 FB9905 D8601 BEAD 127R...
- Page 38 9.2 B 715G9249 SSB (For 24” 43x4 series) 9-2-1 System Power MAIN POWER +3.3V_Standby 5V STANDBY TO 5V NORMAL POWER Controller Inverter controler R4084 CN701 +5V_Standby NC/2.2K1/16W R4085 +5V_Normal +3.3V_Standby CONN 0R05 OHM BL-ON/OFF BL-ADJUST R4086 STANDBY Q410 BL-ADJUST 100R R4087 MTP2317N3 R4109...
- Page 39 9-2-2 MSD92LGSW2 RXO0- RXO0- RC is for EMI RXO0+ SPI NOR FLASH DDR3 POWER RXO0+ RXO1- FB400 120R I2S-MCK I2S_MCLK RXO1+ RXO1- CORE POWER TPV:E-Pad Mini LVDS AVDD_MOD1 I2SOUTC_MCK RXO1+ FB401 120R RXO2- for CNL1 +1.5V_DDR DVDD_DDR RXO2- +1.5V_DDR connect to GND 1 I2S-BCK I2S_SCLK RXO2+...
- Page 40 9-2-3 LVDS SZ LVDS Connector RXO0- RXO0- RXO0+ +3.3V_Normal RXO0+ RXO1- PANEL_POWER RXO1- RXO1+ RXO1+ RXO2- RXO2- R4113 RXO2+ CN408 RXO2+ RXOC- RXOC- RXOC+ NC/4.7K 1/16W RXOC+ RXO3- RXO3- RXO3+ RXO3+ LVDS_SEL PANEL_ON/OFF RXO4- R4114 RXO4- RXO0- RXO0+ RXO4+ NC/4.7K RXO4+ RXO1- RXO1+...
- Page 41 9-2-4 HDMI/ARC/UART Rear HDMI 1 HDMI1/5V HDMI1_RX0P HDMI1_RX0P ARC DETECT HDMI1_RX0N HDMI1_RX0N HDMI1/5V HDMI1_RX1P CN501 HDMI1_RX1P HDMI1_RX1N R4059 HDMI1_RX1N HDMI1_RX0P R4060 R4079=22K(ARC)-->0(NOT ARC) HDMI1_RX2P TMDSD0+ HDMI1_RX2P HDMI1_RX0N HDMI1_RX2N HDMI1_RX2N TMDSD0- HDMI1_CLKP R4077 HDMI1_CLKP HDMI1_RX1P HDMI1-HPD HDMI1_CLKN TMDSD1+ HDMI1_CLKN HDMI1_RX1N Q400 HDMI1_SCL TMDSD1- HDMI1_SCL...
- Page 42 9-2-5 USB/SPDIF SPDIF USB 2.0 SPDIF-OPTICAL +5V_USB 388G359J5B1VAT 388G359J5B1VYG CN103 R4133 5.1R 1/16W USB CONN USB0_DM R4134 5.1R 1/16W USB0_DP SPDIF_OUT ZD419 ZD420 SPDIF_OUT CN603 +5V_Normal 088G352F6B3AYG Grounding 088G352F6B3ACL ZD421 NC/AZ5125-01H.R7G NC/AZ5125-01H.R7G FIBER-OPTIC V/T 3P C4106 NC/AZ5125-01H.R7G 100NF 16V 8.5mm optical +5V_Normal +5V_USB U412...
- Page 43 9-2-6 SCART/VGA/RJ45/Audio_in SCART PC / DVI Audio in SCART IN 388G355HLB1EYG 388G355HLB1EAT SCART-FS C4158 C4159 SCAR-LIN CN151 SCAR-RIN 470pF 50V 470pF 50V R4139 SCART-RIN R4140 R4141 75 OHM +-5% 1/16W 10K +-1% 1/16W 10K +-1% 1/16W R4142 75 OHM +-5% 1/16W R4143 R4144 SCART-LIN...
- Page 44 9-2-7 Tuner TUNER POWER DVB-C/T/T2 DIF C4118 C4119 1'st Source :LGIT TDSY-G430D (394GPASEBIL02G) +3.3V_TU +5V_Normal U414 2'nd Source : TCL ST42CS-2-E (394GNPALALL32L) NC/10PF 50V NC/10PF 50V AZ1117CH-3.3TRG1 VOUT TUN_DIF-#T2 TU101 R4174 R4175 R4176 T2 TUNER DIF- 0R05 1/16W 0R05 1/16W 0R05 1/16W C4122 C4121...
- Page 45 9-2-8 Amplifier/HP AMP_3V3 I2SOUTC_DATA I2SOUTC_DATA 4 I2SOUTC_WS R4371 I2SOUTC_WS 100K I2SOUTC_BCLK I2SOUTC_BCLK 4 I2SOUTC_MCK HS600 I2SOUTC_MCK AMP-INL R4375 PIN 7 AMP-INL NC/1K 1/16W 5% AMP-INR AMP-INR AMP_PDN AMP_MUTE PIN 6 R4374 AMP_MUTE I2SOUTC_DATA SDATA AMP_PDN R4357 100R 1/16W 5% AMP_PDN 33 OHM 1/16W R4359 M-SCL...
- Page 46 9-2-9 NAND Flash NAND FLASH +3.3V_Standby +3.3V_Standby U402 R4241 PCM-A7 I/O7 PCM-A6 I/O6 R4252 0R05 OHM NAND-RBZ-1 NAND_RBZ PCM-A5 I/O5 R4251 0R05 OHM NAND-REZ-1 NAND_REZ PCM-A4 I/O4 NAND-CEZ-1 R4250 0R05 OHM NAND_CEZ R4246 NC/0R05 OHM Micron Nand need to NC NAND-CLE-1 R4245 0R05 OHM...
- Page 47 9-2-10 PCMCI TS0-D0~D7 CI Bus Power Control PCMCIA POWER TS0-D0 TS0_D0 R4254 22 OHM 1/16W CN159 TS0-D1 R4255 22 OHM 1/16W TS0_D1 PCMCIA CARD TS0-D2 R4256 22 OHM 1/16W TS0_D2 TS0-D3 R4257 22 OHM 1/16W TS0_D3 PCM_CD1_N PCM-D3 TS0-D4 R4258 22 OHM 1/16W TS0_D4 CD1# TS0-D3...
- Page 48 9-2-11 BT B/T FUNCTION for EMI solution NC , C640 , C641, C642 , C643 狠) BT_LED trace (connector 糤 470pF bypass cap. +3.3V_Standby BT-EN BT_EN BT_LED CN605 BT_LED CONN BT_AUD_R BT_AUD_R BT_AUD_L BT_AUD_L BT_AUD_L_P BT_AUD_L_N BT_AUD_R_P R4319 R4320 BT_AUD_R_N BT_LED R4264...
- Page 49 9-2-12 HOTEL function For BUH daughter board UART-RX 4,6,8 UART-RX UART-TX 4,6,8 UART-TX BATH_AMP_EN CN606 BATH_AMP_EN STANDBY NC/CONN STANDBY IR_RC IR_RC UART-RX IRIN IRIN UART-TX AUOUT_L0 AUOUT_L0 AUOUT_R0 AUOUT_R0 BATH_L_R BATH_AMP_EN IR_RC IRIN STANDBY +5V_Normal +3.3V_Standby C4228 C4229 C4230 NC/1N 50V NC/1N 50V NC/1N 50V Bathroom SPK audio out for BUH...
- Page 50 9.3 B 715G9916 SSB (For 32” 4503/4504 Series) 9-3-1 System Power MAIN POWER POWER Controller 5V STANDBY TO 5V NORMAL +5V_Standby +12V_Normal +3.3V_Standby +5V_Normal PWR_ON_2 +12V_Normal 4,5,9,10,13,14 PWR_ON_2 ZD450 PWR_ON/OFF Q410 PWR_ON/OFF RLZ15B R4109 MTP2317N3 R4102 C4094 4.7K 1/16W "PWR_ON" 4,5,6,7,8,9,10,11,12,13,14 100NF 16V Normal:High...
- Page 51 9-3-2 MSD92LGSW2 RXO0- RXO0- RXO0+ DDR3 POWER RC is for EMI SPI NOR FLASH RXO1- RXO0+ FB400 120R RXO1- CORE POWER TPV:E-Pad I2S-MCK I2S_MCLK RXO1+ Mini LVDS AVDD_MOD1 I2SOUTC_MCK RXO1+ FB401 120R RXO2- +1.5V_DDR DVDD_DDR for CNL1 RXO2- +1.5V_DDR connect to GND 1 I2S-BCK I2S_SCLK RXO2+...
- Page 52 9-3-3 LVDS PANEL_POWER CN407 RXO0- RXO0- NC/CONN 30P RXO0+ +12V_Normal 3,4,9,10,13,14 RXO0+ +12V_Normal RXO1- 32" : R153 = 15K / C758 = 100nF , R4107 = 10K , D701 = NC RXO1- RXO1+ 43" : R153 = 62K / C758 = 220nF , R4107 = NC , D701 = BAS316WS RXO1+ RXO2- +12V_Normal...
- Page 53 9-3-4 HDMI/ARC/UART Rear HDMI 1 Rear HDMI 2 HDMI1_RX0P HDMI2/5V HDMI1_RX0P 2 in 1(HDMI HDMI1_RX0N CN501 CN502 HDMI1_RX0N HDMI1_RX1P HDMI1_RX1P OR MHL) HDMI1_RX1N SHELL1 SHELL1 HDMI1_RX1N HDMI1_RX2P HDMI2_RX2P HDMI1_RX2P HDMI1_RX2P R4074 HDMI1_RX2N R4076 HDMI1_RX2N D2 Shield D2 Shield HDMI1_RX2N HDMI2_RX2N HDMI1_CLKP MHL Signal: 10K 5% 1/16W...
- Page 54 9-3-5 USB/SPDIF USB 2.0 SPDIF +5V_USB SPDIF-OPTICAL 388G359J5B1VAT 388G359J5B1VYG CN103 R4133 5.1R 1/16W USB CONN USB0_DM R4134 5.1R 1/16W USB0_DP ZD419 ZD420 SPDIF_OUT SPDIF_OUT CN118 088G352F6B3AYG +5V_Normal 088G352F6B3ACL Grounding ZD421 NC/AZ5125-01H.R7G C4107 NC/AZ5125-01H.R7G 100P 50V C4106 FIBER-OPTIC NC/AZ5125-01H.R7G 100NF 16V +5V_Normal +5V_USB U412...
- Page 55 9-3-6 RJ45 3,4,5,6,7,9,10,11,12,13,14 RJ45 C188 10N 50V CN105 All Path MDI_TP C192 MDI_TP Grounding(20mil) NC/0.1uF 50V MDI_TN MDI_TN MDI_RP MDI_RP All Path MDI_RN MDI_RN Grounding(20mil) P7 NC C189 C191 NC/RJ45 8P NC/12pF 50V NC/12pF 50V C190 10N 50V Must be differential 100ohm SEPARATE GROUND...
- Page 56 9-3-7 Tuner TUNER POWER 1'st Source : TCL ST42WS-17-E (394GNPALALL53L)_ SCL-Tr <1000ns*90% +3.3V_TU +5V_Normal DVB-C/T/T2 DIF U414 2'nd Source : LGIT TDSY-G480D (394GPASEBIL03G)_ SCL-Tr <300ns*90% C4119 C4118 TU103 VOUT NC/10PF 50V 10PF 50V T2 TUNER TUN_DIF-#T2 R4174 R4175 R4176 DIF- C4121 0R05 1/16W 0R05 1/16W...
- Page 57 9-3-8 Amplifier/HP AMP_3V3 I2SOUTC_DATA I2SOUTC_DATA 4 R4371 I2SOUTC_WS I2SOUTC_WS I2SOUTC_BCLK 100K 1/16W I2SOUTC_BCLK 4 I2SOUTC_MCK HS600 I2SOUTC_MCK R4375 PIN 7 AMP-INL AMP-INL NC/1K 1/16W 5% AMP-INR AMP-INR AMP_PDN AMP_MUTE PIN 6 R4374 AMP_MUTE I2SOUTC_DATA R4357 SDATA AMP_PDN 100R 1/16W 5% AMP_PDN 33 OHM 1/16W I2SOUTC_MCK...
- Page 58 9-3-9 NAND Flash NAND FLASH +3.3V_Standby +3.3V_Standby U402 R4241 PCM-A7 I/O7 PCM-A6 I/O6 NAND-RBZ-1 R4252 0R05 OHM NAND_RBZ I/O5 PCM-A5 NAND-REZ-1 R4251 0R05 OHM NAND_REZ PCM-A4 I/O4 NAND-CEZ-1 R4250 0R05 OHM NAND_CEZ R4246 NC/0R05 OHM NAND-CLE-1 R4245 0R05 OHM NAND_CLE NAND-ALE-1 R4244 0R05 OHM...
- Page 59 9-3-10 PCMCI TS0-D0~D7 CI Bus Power Control TS0-D0 TS0_D0 R4254 22 OHM 1/16W PCMCIA POWER TS0_D0 TS0-D1 TS0_D1 R4255 22 OHM 1/16W CN159 TS0_D1 TS0-D2 TS0_D2 R4256 22 OHM 1/16W PCMCIA 68P TS0_D2 TS0-D3 TS0_D3 R4257 22 OHM 1/16W TS0_D3 +5V_Standby TS0-D4 TS0_D4...
- Page 60 9-3-11 AC Power T9101 POWER X'FMR +12V_Normal +12V_Normal 3,4,5,9,10,14 PWR_ON_2 PWR_ON_2 3,4,5,6,7,8,9,10,11,12,14,15 BD9901 KBP208GL-C FB9901 BEAD COLD 12VS C9109 R9113 C9801 C9100 2.2NF C9131 C9132 C9133 C9134 47UF 450V 2.2NF D9105 470uF 25V 470uF 25V 100N 50V FR107G-A0 L9902 0.25mH D9103 R9112 Q9101...
- Page 61 9-3-12 LED Driver 12VS L8603 47uH VLED+ D8601 FB8601 L8602 SBT5100VSS_F0_100A1 127R 33uH D8602 SBT5100VSS_F0_100A1 R8603 R8604 C8605 100K 100K C8606 C8607 C8601 330UF 35V 100N 50V Q8601 R8612 CY S9240 32A 33K 1% R8605 10R 1% R8619 10 OHM D8603 R8607 R8606...
- Page 62 9.4 B 715G9993 SSB (For 43” 5503 Series) 9-4-1 System Power MAIN POWER 5V STANDBY TO 5V NORMAL POWER Controller R4005 13,14 PWR_12V 0R05 +5V_Standby +12V_Normal 4,5,9,10 +5V_Normal R4006 ZD450 +3.3V_Standby 0R05 R4007 0R05 RLZ15B Q410 R4008 MTP2317N3 0R05 "PWR_ON" R4102 C4094 R4109...
- Page 63 9-4-2 MSD92LGSW2 RXO0- RXO0- DDR3 POWER RC is for EMI RXO0+ SPI NOR FLASH RXO0+ FB400 120R RXO1- RXO1- I2S-MCK I2S_MCLK RXO1+ Mini LVDS CORE POWER TPV:E-Pad AVDD_MOD1 I2SOUTC_MCK RXO1+ FB401 120R RXO2- +1.5V_DDR DVDD_DDR for CNL1 RXO2- +1.5V_DDR I2S-BCK I2S_SCLK RXO2+ connect to GND 1...
- Page 64 9-4-3 LVDS +12V_Normal 3,4,9,10 +12V_Normal PANEL_POWER +12V_Normal PANEL_POWER U750 Output R765 4100 series 220uF C758 C764 C757 100nF 50V D701 R797 NC/BAS316WS R4123 0R05 1/16W AON4421 3.3KOHM 1/10W 6000 series R4124 0R05 1/16W 100NF for T3 RXE4+ R153 R4120 NC/0R05 1/16W 15KOHM 1/10W R4121 NC/0R05 1/16W...
- Page 65 9-4-4 HDMI/ARC/UART Rear HDMI 1 Rear HDMI 2 HDMI1_RX0P HDMI2/5V HDMI1_RX0P 2 in 1(HDMI HDMI1_RX0N CN501 CN502 HDMI1_RX0N HDMI1_RX1P HDMI1_RX1P OR MHL) HDMI1_RX1N SHELL1 SHELL1 HDMI1_RX1N HDMI1_RX2P HDMI2_RX2P HDMI1_RX2P HDMI1_RX2P R4074 HDMI1_RX2N R4076 D2 Shield D2 Shield HDMI1_RX2N HDMI1_RX2N HDMI2_RX2N MHL Signal: HDMI1_CLKP SHELL3...
- Page 66 9-4-5 USB/SPDIF USB 2.0 SPDIF +5V_USB SPDIF-OPTICAL 388G359J5B1VAT 388G359J5B1VYG CN103 R4133 5.1R 1/16W USB CONN USB0_DM R4134 5.1R 1/16W USB0_DP ZD419 ZD420 SPDIF_OUT SPDIF_OUT CN118 088G352F6B3AYG +5V_Normal 088G352F6B3ACL Grounding NC/AZ5125-01H.R7G ZD421 NC/AZ5125-01H.R7G C4107 C4106 FIBER-OPTIC NC/100NF 16V 100NF 16V NC/AZ5125-01H.R7G 8.5mm optical +5V_Normal +5V_USB...
- Page 67 9-4-6 RJ45 3,4,5,6,7,9,10,11,12,13,14 RJ45 C188 NC/10N 50V CN105 All Path MDI_TP C192 MDI_TP NC/100N 50V Grounding(20mil) MDI_TN MDI_TN MDI_RP MDI_RP All Path MDI_RN MDI_RN Grounding(20mil) P7 NC C189 C191 NC/12pF 50V NC/12pF 50V NC/RJ45 8P C190 NC/10N 50V Must be differential 100ohm SEPARATE GROUND...
- Page 68 9-4-7 Tuner TUNER POWER 1'st Source : TCL ST42WS-17-E (394GNPALALL53L)_ SCL-Tr <1000ns*90% +3.3V_TU +5V_Normal U414 DVB-C/T/T2 DIF 2'nd Source : LGIT TDSY-G480D (394GPASEBIL03G)_ SCL-Tr <300ns*90% C4118 AZ1117CH-3.3TRG1 C4119 TU103 VOUT +3.3V_TU NC/10PF 50V NC/10PF 50V +3.3V_TU T2 TUNER TUN_DIF-#T2 R4174 R4175 R4176 DIF-...
- Page 69 9-4-8 Amplifier/HP AMP_3V3 I2SOUTC_DATA I2SOUTC_DATA 4 I2SOUTC_WS R4371 I2SOUTC_WS 100K I2SOUTC_BCLK I2SOUTC_BCLK 4 HS600 I2SOUTC_MCK I2SOUTC_MCK R4375 PIN 7 AMP-INL AMP-INL NC/1K 1/16W 5% AMP-INR AMP-INR AMP_PDN AMP_MUTE PIN 6 R4374 AMP_MUTE I2SOUTC_DATA SDATA AMP_PDN R4357 100R 1/16W 5% AMP_PDN 33 OHM 1/16W I2SOUTC_MCK R4368...
- Page 70 9-4-9 NAND Flash NAND FLASH +3.3V_Standby +3.3V_Standby U402 R4241 I/O7 PCM-A7 PCM-A6 I/O6 R4252 0R05 OHM NAND-RBZ-1 NAND_RBZ PCM-A5 I/O5 R4251 0R05 OHM NAND-REZ-1 NAND_REZ PCM-A4 I/O4 R4250 0R05 OHM NAND-CEZ-1 NAND_CEZ R4246 NC/0R05 OHM Micron Nand need to NC NAND-CLE-1 R4245 0R05 OHM...
- Page 71 9-4-10 PCMCI TS0-D0~D7 388G050028A0AV PCMCIA POWER TS0-D0 TS0_D0 R4254 22 OHM 1/16W TS0-D1 TS0_D1 R4255 22 OHM 1/16W PCMCIA R/A 68P 1*1 BLACK 59.85 x 39 x 10.7mm TS0-D2 TS0_D2 R4256 22 OHM 1/16W TS0-D3 TS0_D3 +5V_Standby R4257 22 OHM 1/16W CI Bus Power Control PCM_CD1_N PCM-D3...
- Page 72 9-4-11 AC Power PWR_12V PWR_12V 3,14 PWR_ON_2 PWR_ON_2 3,4,5,6,7,8,9,10,11,12,14 BD9901 U4KB80 C9135 C9136 1NF 500V 1NF 500V BD9902 T9101 U4KB80 COLD POWER X'FMR D9131 TSD20H100CW 24VS C9109 R9113 C9802 C9801 2.2NF C9134 47UF 450V 47UF 450V D9105 C9131 C9132 R9171 100N 50V FR107G-A0 330UF 35V...
- Page 73 9-4-12 LED Driver FB8601 24VS D8601 BEAD SR506-44 VLED+ FB8602 D8602 BEAD L8602 SR506-44 33uH C8601 C8604 C8605 C8606 C8607 R8603 R8604 330UF 35V 330UF 35V 100N 50V 220N 50V 220N 50V 100K 100K Q8601 R8612 CY S9240 32A 33K 1/10W 1% R8605 10 OHM 1% 1/10W R8619...
- Page 74 9.5 J 715G8576 IR/LED Panel (For 24” 53x4 Series) 9-5-1 IR LED LED_R 15K 1/16W 5% Vout TSOP75436TR 2.2uF 10V CONN 033G8032 5F 2K7 1/16W 5% LED1 GPSS008RC4 LED_R 22K 1/16W 5% BC847BW 100N 16V 22K 1/16W 5%...
- Page 75 9.6 E 715G8623 IR Board (For 32” 4503/4504 Series) 9-6-1 IR Light Sensor CN201 R223 R224 R225 R226 R227 R228 R229 I2C ADDR LED_R DVD3V3 DVD3V3 JSA-1130 0x44 RC-IR C222 1uF 10V JSA-1130 0x45 3V3SB LS_SCL R225 0R05 1/16W C221 100N 16V DVD3V3 LS_SDA...
- Page 76 9.7 E 715G9806 IR Board (For 43” 5503 Series) 9-7-1 IR&STB LED CN201 CONN CN202 CONN LED_R RC-IR 3V3SB Standby LED IR Receiver ZD200 ZD201 near U212 pin 3V3SB 3V3SB R201 10K 1/16W 5% ZD200 R211 NC/AZ5123-01H U212 100R 1/16W 5% IR_power LED201 RC-IR...
- Page 77 9.8 E 715G9740 Keyboard control panel (For 32” 4503/4504 &43” 5503 Series) 9-8-1 Key...
- Page 78 10. Styling Sheets 10.1 43x4 series 22" /24" 1053 0050 1184 1050 0040 1054 0030 1056...
- Page 79 10.2 4503/4504 series 32", 5503 series 43” 1052 1050 1184 0063 1057 1056 0050 0036 0030...