Epson ELPAP12 User Manual page 3

Caution
• Make sure that both ends of the cables are connected securely. If the cables are not connected securely, they may become
disconnected and fall out causing an injury or a decline in image quality.
• Cables should be wired so that they cannot trip people up and so on. This could cause people to fall and be injured.
• Do not use or store the device in places where it might be subjected to high and low extremes of temperature. Furthermore, avoid
places where the temperature may change suddenly. Be sure to observe the operating temperatures and storage temperatures
given in this guide when using and storing the device.
• When using this device continuously, keep it at least 20 cm away from your body. Failure to do so may cause you to feel unwell.
• Keep batteries that have been removed from the remote control out of the reach of children. Children could swallow the batteries
which could become stuck in the throat. If a battery is swallowed, seek medical attention immediately.
• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in fire, injury or corrosion of the
projector. When replacing batteries, take the following precautions.
- Do not use batteries of different types or mix old and new batteries.
- Do not use any batteries other than those specified in this guide.
- If the batteries leak, wipe away battery fluid with a cloth and so on, and replace them with new batteries. If fluid gets on your
hands, wash them immediately.
- Remove the batteries when it is time to replace it.
- Remove the batteries if you will not be using the projector for a long period of time.
- Do not expose batteries to heat or flame and do not put them in water.
- Insert batteries so that the polarities (+ and -) are correct.
Caution
• Do not use this device in an enclosed environment. In an environment where there is no air circulation, the temperature inside the
device may rise preventing it from operating correctly.
4
5