Epson ELPAP12 User Manual page 7

• When suspending the projector from a ceiling, you can use tape to secure
the USB power supply cable as shown in the figure to prevent the Android TV
device from hanging down.
• Do not block the air intake or exhaust vents on the projector. If the tempera-
ture of the projector or this device rises, it may cause a fire or malfunction to
occur.
• The figure is an example of how to wire the device. Do not bend or twist the
cable with too much force, as this may cause it to disconnect.
Connect the Android TV device and the remote control (pairing)
A Turn on the projector. If pairing is
necessary, the following screen is
displayed.
12
13
B Hold down the Enter button
and the volume down
button on the remote
control at the same time for
about three seconds.