Listening To The Fm - Sharp FV-DB1E Operation Manual

Listening to the FM

1
Press the ON/STAND-BY button to turn the power on.
2
Press the BAND button until "FM" ap-
pears on the display.
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for 2 seconds or more,
scanning will start automatically and the tuner will stop at the
first receivable broadcast station.
Notes:
" When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the BAND button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
" If the FM reception is weak, press the BAND button to extinguish
the "ST" indicator. The reception changes to monaural, and the
sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
04/4/12 FV-DB1E_2.fm
FV-DB1E
4
13
TINSEA025SJZZ