Related Manuals for Dell SE2422HR
Summary of Contents for Dell SE2422HR
- Page 1 Dell 24 Monitor SE2422HR/SE2422HM User’s Guide Model: SE2422HR/SE2422HM Regulatory model: SE2422HRt/SE2422HMt...
- Page 2 WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
-
Page 3: Table Of Contents
Contents Safety instructions......5 About your monitor ......6 Package contents . - Page 4 FCC Notices (U.S. only) and Other Regulatory Information 69 Contacting Dell..... . . 69 EU product database for energy label and product information sheet .
-
Page 5: Safety Instructions
Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. • Using both hands, lift the monitor carefully and place on a solid surface. The screen is fragile and can be damaged if dropped or hit sharply. -
Page 6: About Your Monitor
NOTE: Some components may be optional and may not ship with your monitor. Your monitor ships with the components shown in the table below. If any component is missing, contact Dell technical support for assistance. For more information on contacting Dell, See Contacting Dell. - Page 7 HDMI cable (SE2422HR only) VGA cable (SE2422HM only) • Quick Setup Guide • Safety, Environmental, and Regulatory Information About your monitor...
-
Page 8: Product Features
(TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include: • 60.47 cm (23.8 in.) viewable area monitor (measured diagonally), 1920 x 1080 (16:9) resolution, plus full-screen support for lower resolutions. • Color gamut of 72% NTSC (typical), CIE 1931. • Digital connectivity with HDMI (SE2422HR only) and DVI (SE2422HM only). • Tilt adjustment capability. • Removable pedestal stand and Video Electronics Standards Association (VESA™) 100 mm mounting holes for flexible mounting solutions. -
Page 9: Identifying Parts And Controls
Identifying parts and controls Front view Label Description Function buttons For more information, see Operating the monitor. Power LED indicator • Solid white light indicates the monitor is turned on and functioning normally. • Blinking white light indicates the monitor is in Standby mode. About your monitor... -
Page 10: Back View
Dell service technicians to identify the hardware components in your monitor and access warranty information. Refer to this label if you need to contact Dell for technical support. VESA cover The two endpoints on the front of the... -
Page 11: Bottom View
Bottom view SE2422HR Label Description Security lock slot Secures monitor with security cable lock (sold separately). Power connector Connect the power cable. HDMI port Connect the HDMI cable. VGA port Connect the VGA cable. About your monitor... - Page 12 SE2422HM Label Description Security lock slot Secures monitor with security cable lock (sold separately). Power connector Connect the power cable. DVI port Connect the DVI cable. VGA port Connect the VGA cable. About your monitor...
-
Page 13: Monitor Specifications
Use Normal/Fast/Extreme mode for optimal front of screen experience and game play. Color depth 16.70 million colors Color gamut* 72% NTSC, CIE 1931 Connectivity SE2422HR • 1 x HDMI 1.4 port (HDCP 1.4) • 1 x VGA SE2422HM • 1 x VGA • 1 x DVI (HDCP 1.4) About your monitor... -
Page 14: Resolution Specifications
Bottom 16.92 mm Adjustability Height adjustable stand Tilt -5° to 21° Cable management Dell Display Manager (DDM) Easy Arrange and other key features Compatibility Security Security lock slot (cable lock sold separately) * At panel native only, under Custom Mode preset. Resolution specifications... -
Page 15: Preset Display Modes
Preset display modes SE2422HR Display Mode Horizontal Vertical Pixel Clock Sync Polarity Frequency (MHz) (Horizontal/ frequency (kHz) Vertical) (Hz) 720 x 400 31.47 70.08 28.32 640 x 480 31.47 59.94 25.18 640 x 480 37.50 31.50 800 x 600 37.88 60.317 800 x 600 46.88 49.50 1024 x 768 48.36 1024 x 768 60.02... - Page 16 SE2422HM Display Mode Horizontal Vertical Pixel Clock Sync Polarity Frequency (MHz) (Horizontal/ frequency (kHz) Vertical) (Hz) 720 x 400 31.47 70.08 28.32 640 x 480 31.47 59.94 25.18 640 x 480 37.50 31.50 800 x 600 37.88 60.317 800 x 600 46.88 49.50 1024 x 768 48.36 1024 x 768 60.02 75.029 78.75 1152 x 864 67.50...
-
Page 17: Electrical Specifications
Electrical specifications Description SE2422HR SE2422HM Video input signals • HDMI 1.4 , 600mV • DVI, 600mV for each for each differential differential line, 100 line, 100 ohm input ohm input impedance impedance per per differential pair differential pair • Analog RGB, 0.7 • Analog RGB, 0.7 Volts +/- 5%, positive Volts +/- 5%, positive polarity at 75 Ω input polarity at 75 Ω input... -
Page 18: Physical Characteristics
Physical characteristics Description SE2422HR SE2422HM Connector type • One HDMI 1.4 port • One VGA port • One VGA port • One DVI port Signal cable type • HDMI 1.8 m cable • VGA 1.8 m cable Dimensions (with stand) Height 420.25 mm (16.55 in.) Width 552.64 mm (21.76 in.) Depth 178.81 mm (7.04 in.) Dimensions (without stand) Height 331.61 mm (13.06 in.) Width 552.64 mm (21.76 in.) -
Page 19: Environmental Characteristics
Environmental characteristics Description Values Compliant Standards • RoHS Compliant • BFR/PVC reduced monitor (excluding external cables) • Arsenic-Free glass and Mercury-Free for the panel only Temperature Operating 0°C to 40°C (32°F to 104°F) Non-operating Storage:–20°C to 60°C (–4°F to 140°F) Shipping:–20°C to 60°C (–4°F to 140°F) Humidity Operating 20% to 90% (non-condensing) Non-operating •Storage: 5 % to 90 % (non-condensing) •Shipping: 5 % to 90 % Altitude Operating 5000 m (16,404 ft) (maximum) Non-operating 12.192 m (40,000 ft) (maximum) Thermal dissipation 81.89 BTU/hour (maximum) -
Page 20: Pin Assignments
Pin assignments VGA connector Pin number 15-pin side of the connected signal cable Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B Computer 5 V / 3.3 V GND-sync DDC data H-sync V-sync DDC clock About your monitor... - Page 21 HDMI port (SE2422HR only) Pin number 19-pin side of 19-pin side of the connected signal number the connected signal cable cable TMDS DATA 2+ TMDS CLOCK SHIELD TMDS DATA 2 SHIELD TMDS CLOCK- TMDS DATA 2- TMDS DATA 1+ Reserved (N.C. on device) TMDS DATA 1 SHIELD...
- Page 22 DVI port (SE2422HM only) Pin number 24-pin side of the connected signal cable TMDS Data 2- TMDS Data 2+ TMDS Data 2/4 Shield TMDS Data 4- TMDS Data 4+ DDC Clock DDC Data Analog Vertical Sync TMDS Data 1- TMDS Data 1+ TMDS Data 1/3 Shield TMDS Data 3- TMDS Data 3+ +5V Power Ground Hot Plug Detect TMDS Data 0- TMDS Data 0+ TMDS Data 0/5 Shield...
-
Page 23: Plug-And-Play
During the LCD monitor manufacturing process, it is common for one or more pixels to become fixed in an unchanging state. This is hard to notice and will not affect the display quality or usability. For more information on LCD Monitor Pixel Policy, see: https://www.dell.com/pixelguidelines. About your monitor... -
Page 24: Ergonomics
Ergonomics CAUTION: Improper or prolonged usage of keyboard may result in injury. CAUTION: Viewing the monitor screen for extended periods of time may result in eye strain. For comfort and efficiency, observe the following guidelines when setting up and using your computer workstation: • Position your computer so that the monitor and keyboard are directly in front of you as you work. - Page 25 • Keep the area under your desk clear of obstructions and cables or power cords that may interfere with comfortable seating or present a potential trip hazard. monitor screen at or below eye level monitor and keyboard positioned in front of the user wrists relaxed and at...
-
Page 26: Handling And Moving Your Display
Handling and moving your display To ensure the monitor is handled safely when lifting or moving it, follow the guidelines mentioned below: • Before moving or lifting the monitor, turn off your computer and the monitor. • Disconnect all cables from the monitor. • Place the monitor in the original box with the original packing materials. -
Page 27: Maintenance Guidelines
• When lifting or moving the monitor, do not turn the monitor upside down while holding the stand base or stand riser. This may result in accidental damage to the monitor or cause personal injury. Maintenance guidelines Cleaning your monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet to avoid personal injury or damage to hardware or property. -
Page 28: Setting Up The Monitor
Setting up the monitor Connecting the stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are connecting a stand that you purchased from any other source, follow the setup instructions that were included with the stand. - Page 29 3. Align the tabs on the stand-riser bracket with the grooves at the back of the monitor. 4. Insert the stand-riser bracket into monitor groove until it snaps into place. 5. Open the monitor protective cover and install the VESA cover. Setting up the monitor...
- Page 30 CAUTION: Hold the stand riser firmly when lifting the monitor to avoid any accidental damage. 6. Hold the stand riser and lift the monitor carefully, then place it on a clean and flat surface. 7. Lift the protective cover from the monitor. Setting up the monitor...
-
Page 31: Using The Tilt
Using the tilt NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. If you are connecting a stand that you purchased from any other source, follow the set up instructions that were included with the stand. With the stand attached to the monitor, you can tilt the monitor for the most comfortable viewing angle. -
Page 32: Connecting Your Monitor
Connect the HDMI/VGA/DVI cable from your monitor to the computer. 3. Turn on your monitor. Select the correct input source from the OSD Menu on your monitor and then turn on your computer. Connecting the VGA cable Connecting the HDMI cable (SE2422HR only) HDMI HDMI Setting up the monitor... -
Page 33: Organising Your Cables
Connecting the DVI cable (SE2422HM only) Organising your cables After connecting all necessary cables to your monitor and computer, (see Connecting your monitor for cable attachment) organise all cables as shown in the image. Setting up the monitor... -
Page 34: Securing Your Monitor Using Kensington Lock (Optional)
Securing your monitor using Kensington lock (optional) NOTE: Kensington lock is sold separately. The security lock slot is located at next to the power connector on the I/O panel. (See bottom view for location of security lock slot.) For more information about using the Kensington lock (sold separately), see the documentation that is shipped with the lock. Secure your monitor to a table using the Kensington lock. -
Page 35: Removing The Monitor Stand
Removing the monitor stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean and flat surface. NOTE: The following instructions are applicable only for the stand that was shipped with your monitor. -
Page 36: Wall Mounting (Optional)
To remove the VESA cover: Press the dimple on the VESA cover to release it from the back of the display. Wall mounting (optional) NOTE: Use M4x10 mm screws to secure the wall-mounting kit to the monitor. NOTE: The wall-mounting kit is sold separately. See the documentation that is shipped with the VESA-compatible wall mounting kit. -
Page 37: Operating The Monitor
Operating the monitor Power on the monitor Press the button to turn on the monitor. Using the front panel controls Use the control buttons at the bottom edge of the monitor to adjust the specifications of the image being displayed. When using the control buttons, an On-Screen Display (OSD) menu appears on the screen. Operating the monitor... - Page 38 The following table describes the front panel buttons: Front-Panel Button Description Use this button to choose from a list of preset color modes. Shortcut key: Preset Modes Direct access to the Brightness/Contrast adjustment sliders. Shortcut key: Brightness/Contrast Use this menu button to launch the on-screen display (OSD) and select the OSD menu.
-
Page 39: Using The Osd Lock Function
Using the OSD lock function You can lock the front-panel control buttons to prevent access to the OSD menu and/ or power button. Use the Lock menu to lock the button(s). Select one of the following options. Dell 24 Monitor Brightness/Contrast Language Auto Adjust Transparency Input Source Timer Color Lock Menu Buttons Power Button... - Page 40 3 4 5 1. Press and hold Built-in diagnostics button (button 4) for four seconds, a menu appears on the screen. Dell 24 Monitor Select Option: 2. Select one of the following options: Options Description Select this option to lock OSD menu function.
- Page 41 Built-in diagnostics button (button 4) for four seconds until a menu appears on the screen. The following table describes the options to unlock the front- panel control buttons. Dell 24 Monitor Dell 24 Monitor Dell 24 Monitor Select Option: Select Option:...
-
Page 42: Front-Panel Button
Front-panel button Use the buttons on the front of the monitor to adjust the image settings. 2 3 4 Front Panel Button Description Use the Up button to increase values or move up in a menu. Use the Down button to decrease values or move down in a menu. -
Page 43: Using The On-Screen Display (Osd) Menu
NOTE: The changes you make using the OSD menu are automatically saved when you move to another OSD menu, when you exit the OSD menu, or when the OSD menu exit automatically. 1. Press the button to launch the OSD main menu. Dell 24 Monitor Brightness/Contrast Auto Adjust Input Source Color... - Page 44 Icon Menu and Description Submenus Brightness/ Use this menu to activate Brightness/Contrast adjustment. Contrast Dell 24 Monitor Brightness/Contrast Auto Adjust Input Source Color Display Menu Personalize Others Brightness Brightness adjusts the luminance of the backlight (minimum 0; maximum 100). Press the button to increase brightness.
- Page 45 Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display menu. Dell 24 Monitor Brightness/Contrast Auto Adjust Press to adjust the screen automatically.
- Page 46 Icon Menu and Description Submenus Input Source Use the Input Source menu to select between different video inputs that are connected to your monitor. SE2422HR Dell 24 Monitor Brightness/Contrast HDMI Auto Adjust Auto select Input Source Reset Input Source Color...
- Page 47 Reset Input Resets your monitor’s Input Source settings to the factory Source defaults. Color Use the Color menu to adjust the color setting mode. Dell 24 Monitor Brightness/Contrast Preset Modes Standard Auto Adjust Input Color Format Input Source...
- Page 48 Icon Menu and Description Submenus Preset SE2422HR: When you select Preset Modes, you can Modes choose Standard, ComfortView, Movie, FPS, RTS, RPG, Warm, Cool or Custom Color from the list. Dell 24 Monitor Brightness/Contrast Preset Modes Standard Auto Adjust Input Color Format ComfortView Movie...
- Page 49 Ergonomics. • M ovie: Loads color settings ideal for movies. • F PS (SE2422HR only): Loads color settings ideal for First- Person Shooter games. • R TS (SE2422HR only): Loads color settings ideal for Real- Time Strategy games.
- Page 50 • R GB: Select this option if your monitor is connected to a computer or a media player that supports RGB output. • Y CbCr/YPbPr*: Select this option if your media player supports only YCbCr/YPbPr output. Dell 24 Monitor Preset Modes Brightness/Contrast Input Color Format...
- Page 51 Icon Menu and Description Submenus Display Use the Display menu to adjust image. Dell 24 Monitor Brightness/Contrast Aspect Ratio 16 : 9 Auto Adjust Horizontal Position Input Source Vertical Position Color Sharpness Display Pixel Clock Menu Phase Personalize Response Time...
- Page 52 Submenus Menu Select this option to adjust the settings of the OSD, such as the languages of the OSD, the amount of time the menu remains on screen, and so on. Dell 24 Monitor Brightness/Contrast Language English Auto Adjust Transparency...
- Page 53 Icon Menu and Description Submenus Lock Controls user access to adjustments. The buttons are locked. Dell 24 Monitor Brightness/Contrast Language Auto Adjust Transparency Input Source Timer Color Lock Menu Buttons Power Button Display Reset Menu Menu Menu + Power Buttons...
- Page 54 Icon Menu and Description Submenus Personalize Dell 24 Monitor Brightness/Contrast Shortcut Key 1 Preset Modes Auto Adjust Shortcut Key 2 Brightness/Contrast Input Source Power Button LED On in On Mode Color Reset Personalization Display Menu Personalize Others Shortcut Select from Preset Modes, Brightness/Contrast, Auto key 1 Adjust,Input Source, Aspect Ratio set as shortcut key 1.
- Page 55 Icon Menu and Description Submenus Others Select this option to adjust the OSD settings such as the DDC/CI, LCD conditioning, and so on. Dell 24 Monitor Brightness/Contrast Display Info Auto Adjust DDC/CI Input Source LCD Conditioning Service Tag Color ABCDEF Reset Others...
- Page 56 Others Service Tag Displays the Service Tag. The Service Tag is a unique alphanumeric identifier that allows Dell to identify the product specifications and access warranty information. NOTE: The Service Tag is also printed on a label located at the back of the cover.
-
Page 57: Osd Warning Messages
OSD warning messages When the monitor does not support a particular resolution mode, you can see the following message: Dell 24 Monitor The current input timing is not supported by the monitor display. Please change your input timing to 1920x1080, 60Hz or any other monitor listed timing as per the monitor specifications. SE2422HR/SE2422HM This means that the monitor cannot synchronize with the signal that it is receiving from the computer. - Page 58 Dell 24 Monitor Going into Standby mode… SE2422HM Activate the computer and wake up the monitor to gain access to the OSD. If you press any button other than the power button, the following messages will appear depending on the selected input: Dell 24 Monitor No HDMI signal from your device.
- Page 59 Dell 24 Monitor Are you sure you want to reset to default settings? SE2422HR/SE2422HM If adjust the Brightness level above the default level over 75%, the following message will appear: Dell 24 Monitor Adjusting to this value will increase power consumption above the default level. Do you want to continue? SE2422HR/SE2422HM • When user selects “Yes”, the power message is displayed only once.
- Page 60 If either HDMI, VGA, DVI input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. Dell 24 Monitor No HDMI Cable The display will go into Standby mode in 4 minutes. www.dell.com/SE2422HR...
-
Page 61: Setting The Maximum Resolution
If you are using a non-Dell computer (laptop or desktop): • Go to your computer manufacturer’s support website and download the latest graphic drivers. • Go to your graphics card manufacturer’s website and download the latest graphic drivers. -
Page 62: Troubleshooting
3. Turn on the monitor. If the monitor is working correctly and detects no input signal, depending on the connectivity, one of the following dialog appears. While in self-test mode, the power LED remains white. Dell 24 Monitor No HDMI Cable The display will go into Standby mode in 4 minutes. www.dell.com/SE2422HR... -
Page 63: Built-In Diagnostics
Dell 24 Monitor No DVI Cable The display will go into Standby mode in 4 minutes. www.dell.com/SE2422HM SE2422HM NOTE: This box also appears during normal system operation if the video cable is disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. - Page 64 3. Select the built-in diagnostics option. A gray screen appears. Carefully inspect the screen for abnormalities. 5. Press button 1 on the front panel again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. Repeat steps 5 to 6 to inspect the display when it changes to green, blue, black, white, and text screens.
-
Page 65: Common Problems
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common What you Possible solutions symptoms experience No video/ No picture • Ensure that the video cable connecting the Power LED off monitor and the computer is properly connected and secure. - Page 66 Possible solutions symptoms experience Missing pixels LCD screen has • Cycle power on-off. spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and Pixel Policy, see, https://www.dell.com/pixelguidelines. Stuck-on pixels LCD screen has • Cycle power On-Off. bright spots • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and PixelPolicy, see, https://www.dell.com/pixelguidelines.
- Page 67 Safety related Visible signs of • Do not perform any troubleshooting steps. issues. smoke or sparks • For more information on contacting Dell, see Contact Dell immediately. Intermittent Monitor • Ensure that the video cable connecting the problems malfunctions on monitor to the computer is connected properly &...
-
Page 68: Product Specific Problems
Product specific problems Problem What you Possible solutions experience Screen image is Image is centered • Check the Aspect ratio setting in the too small on screen, but Display menu OSD. does not cover the • Reset the monitor to factory settings. entire viewing area Cannot adjust OSD does not... -
Page 69: Appendix
For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.