Initiating Pairing From Your Bluetooth-Enabled Mobile Phone - Cisco SPA 525G User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)

Initiating Pairing from Your Bluetooth-Enabled Mobile Phone

The procedure varies depending on your phone model. You must turn Bluetooth on,
and you may need to configure a separate setting to make your mobile phone
discoverable by other devices. The following example uses an Apple iPhone.
Before starting, it's helpful to find the MAC address of your Cisco SPA 525G2 IP
phone. From your IP phone, go to the Setup menu and select Status. Select
Product Information. The MAC address is displayed.
On your iPhone, click Settings.
Under General, choose Bluetooth. Ensure Bluetooth is turned on.
In the Bluetooth Window, under Devices, find the MAC address of your Cisco SPA
525G2 IP phone.
Select the MAC address of the Cisco SPA 525G2.
4
68