Using Star Codes - Cisco SPA 525G User Manual

Using Advanced Phone Features

Using Star Codes

Using Star Codes
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)
The Cisco SPA 525G/525G2 supports numerous "star codes" to access phone
supplementary services. These codes, which start with *, are entered before
dialing a telephone number and provide services. For example, to block caller ID
(star code 67), you would dial *67, followed by the telephone number you are
calling.
Following is a list of supported star codes. Note that some codes must be
configured by your phone administrator and may not be available on all systems.
Code Definition
03 Request media loopback for a call to monitor Voice over IP quality.
16 Activate Secure Call feature for all calls. See
page
17 Deactivate Secure Call feature for all calls. See
page
18 Activate Secure Call feature for a single call. See
page
19 Deactivate Secure Call feature for a single call. See
page
36 Pick up a call at another extension. See
37 Pick up a group call. See
38 Park a call. See
39 Unpark a call. See
66 Activate Call Back.
repeatedly dial a busy number until the called party rings or
answers.
69 Calls the last number that called your phone.
72 Activate Call Forward All. See
73 Deactivate Call Forward All. See
61.
61.
61.
61.
Picking Up a Call, page
Parking a Call, page
Parking a Call, page
Causes the Cisco SPA 525G/525G2 to
Using Secure Call,
Using Secure Call,
Using Secure Call,
Using Secure Call,
Picking Up a Call, page
48.
48.
48.
Forwarding Calls, page
Forwarding Calls, page
4
48.
44.
44.
88