Lenovo ThinkSystem SD530 Manual page 39

POST Attempts
Item
Post Attempt Limit
Note: You may encounter some message boxes when post attempts. Follow the message for setup.
Advanced RAS
Item
Machine Check Recovery
PCI Error Recovery
PCIe Endpoint Reset on Fatal
Error
Options Description
Configure the number of attempts to POST before the
• Disable
recovery mechanism is invoked. When the number of
• 9
consecutive failed POST attempts reaches the limit, the
system will reboot with the factory default settings. 3 is
• 6
the default setting.
• 3
Options Description
Enable software layers (OS, VMM, DBMS, Application) to
• Enable
assist in system recovery from hardware uncorrectable
• Disable
error. Enable is the default setting.
Allow the system to recover from an uncorrectable PCIe
• Enable
fault when enabled. The faulting PCIe device will be
• Disable
disabled for error containment and the OS will be notified
to rescan the PCIe buses. Disable is the default setting.
An uncorrectable PCIe fault will result in an NMI when
disabled.
PCIe Endpoint Reset On Fatal Error. Disable is the default
• Enable
setting.
• Disable
.
Chapter 3 System configuration and boot management
35