Honeywell VERISHIELD-VS 332i User Instructions page 3

Table of Contents

Advertisement

C1
Power Button
C2
Dose Button
(C) OPERATING THE HEADSET - HEADSET CONTROLS
C3
Dose Indicator
C4
Power Indicator
C1
C4
C3
C2
C5
(D) TEST RESULTS AND TECHNICAL DATA
TESTED ACCORDING TO ANSI S3.19-1974
Frequency, Hz *D1
Mean Attenuation, dB *D2
Standard Deviation, dB *D3
Verishield is tested and approved in accordance with ANSI S3.19-1974 Standard at Michael &
Associates Inc., USA. Verishield Attenuation Data according to American National Standards
Institute Specifications ANSI S3.19-1974 (in passive mode, electronics switched off)
The level of noise entering a person's ear, when hearing protection is worn as directed, is closely
approximated by the difference between the A-weighted environmental level and the NRR.
EXAMPLE:
1. The environmental noise level at the ear is
2. The NRR is
xx
decibels (dB).
3. The level of noise entering the ear is approximately equal to
CAUTION:
For noise environments dominated by frequencies below 500 Hz, the C-weighted
environmental noise level should be used. Improper fit of this device will reduce its effectiveness
in attenuating noise. Although hearing protectors can be recommended for protection against the
harmful effects of impulse noise, the Noise Reduction Rating (NRR) is based on the attenuation
of continuous noise and may not be an accurate indicator of the protection attainable against
impulse noise, such as gunfire. Constant or repetitive exposure to impulsive noise may lead to
serious injury, including temporary or permanent deafness. The Noise Reduction Rating (NRR)
calculated from the attenuation data is xx dB. Earmuffs must be properly fitted to attenuate noise
effectively. Refer to instructions.
NOTE:
The Noise Reduction Rating is derived from testing procedures at an independent
laboratory and in accordance to acceptable A.N.S.I. standards. Actual noise reduction can vary
from laboratory results as labelled. Protection is maximized when: proper protector is selected for
application, a good training program is utilized and proper fitting techniques are followed.
2
C5
Hear-Through Dial
C6
Multi-Function Button
C7
Volume Button Up
C8
Volume Button Down
C10
C11
125 250 500 1000 2000 3150 4000 6300 8000
x
x
xx
x
x
x
x
x
xx
dB (A).
C9
Pairing Indicator
C10
USB-C & Charging Indicator
C11
Microphone for voice calls
x
x
x
x
x
x
xx
dB (A).
C8
C7
C9
C6
NRR
x dB
x
x
Canada
x
x
Class xx

Advertisement

Table of Contents
loading

Table of Contents