Table of Contents
Advertisement
(C) OPERATING THE HEADSET - GETTING STARTED
HEADSET CONTROLS
C1
Power Button
C2
Dose Button
C3
Dose Indicator
C4
Power Indicator
GETTING STARTED
Power On
Power Off
Adjust hear-through volume
Auto shut off
CONNECT TO PERSONAL NOISE EXPOSURE APP
Enable Bluetooth on your mobile device and ensure the mobile device is within 10m of the
headset. The headset is connected through the App. Next time the headset is turned on, it will try
automatically connect.
CONNECT TO PERSONAL NOISE EXPOSURE APP
First time pairing
Finding a headset
Confirm a connected headset
Clear Connected Headsets
Cancel Connection
PERSONAL NOISE EXPOSURE MONITORING
Dose safe (0-85%)
Dose warning (85%-100%)
Dose Alarm (Above 100%)
Reset Dose
Silence Dose Alarm
Dose status voice message
FIT TEST (MAY BE ALSO ACTIVATED THROUGH THE APP)
Perform Fit test
Fit test result: Good fit
Fit test result: Poor fit
Fit test result: Not available
C5
Hear-Through Dial
C6
Multi-Function Button
C7
Volume Button Up
C8
Volume Button Down
Hold *C1 for 3s
Rotate dial *C5
No activity in 4 hours
Open the app and follow on-screen instructions
Initiate from app
Open the app and follow on-screen
instructions. Press *C1 Once
Hold *C1 10s while powering on
Press *C2 in connection process
Hold *C2 for 5s
Press *C2
Press *C2
Double press *C2
C9
Pairing Indicator
C10
USB C & Charging Indicator
C11
Microphone for voice calls
Audio Tone and *C4 solid green 5s
Audio Tone and *C4 flashes red
Ambient volume +/-
Audio Tone and *C4 flashes red
*C4 flashing blue
*C4 solid blue 2s
* C4 flashing blue, red
*C3 blinks green
*C3 blinks orange + Warning tone
*C3 blinks red + Warning tone
On success, *C3 double flashes green + audio tone
Audio tone off. *C3 flashes red and stops.
Dose level low (0-40%)
Dose level medium (41-70%)
Dose level high (71-100%)
Dose level too high (100+%)
Repeated audio tone + Voice Feedback
Positive audio tone + Voice Feedback
Negative audio tone + Voice Feedback
Voice message; Fit test not possible
Advertisement
Table of Contents
