Basics; Making Calls - Sony SPP-A400 Operating Instructions Manual

Basics

Making calls

VOL
switch
TALK/BATT
LOW lamp
(CHANNEL)
(*TONE)
Additional tasks
To
Improve reception
Adjust the handset volume
Switch to tone dialing temporarily Press (*TONE) after you're connected.
Notes
• If the handset beeps every second during conversation, move closer to the
base unit; otherwise, the call will be disconnected after 15 seconds. Note
that, however, you may not hear beeps if it's noisy on the handset.
• Do not press (CHANNEL) when you're far from the base unit. The call may
be disconnected.
1
Pick up the handset from the
base unit.
2
Press (TALK) and wait until the
TALK/BATT LOW lamp lights
up.
You then hear a dial tone. If you
hear five short error beeps,
move closer to the base unit.
3
Dial the phone number.
4
When you're done talking, press
(OFF) or replace the handset on
(REDIAL/PAUSE)
the base unit.
The TALK/BATT LOW lamp
goes off.
Do this
Press (CHANNEL).
Slide VOL.
The line will remain in tone dialing until
disconnected.
continued
EN
13
Basics