Basics; Making Calls - Sony SPP-930 Operating Instructions Manual

Basics

Making calls

TALK lamp
(REDIAL)
(*TONE)
(CHANNEL)
Additional tasks
To
Select a better channel
Switch to tone dialing temporarily
If the handset battery becomes weak during a call
You hear a beep and the BATT LOW lamp on the handset flashes.
The call will disconnect soon. Replace the handset on the base unit to
charge.
Notes
• Before dialing, make sure you can hear the dial tone, otherwise you cannot
dial correctly.
• When the TALK lamp lights up by pressing (TALK), the IN USE lamp on the
base unit lights up simultaneously.
12
EN
Basics
1
Press (TALK).
The TALK lamp lights up, then you'll
hear a dial tone. If you hear beeps,
BATT LOW
move closer to the base unit.
lamp
2
Dial the phone number.
3
When you're done talking, press
(OFF) or replace the handset on the
base unit.
The TALK lamp goes off.
Do this
Press (CHANNEL).
Press (*TONE) while using the
telephone after you're connected.
The line remains in tone dialing
until disconnected.