Table of Contents
Advertisement
Digital zoom +
Zoom in the images.
1 )
Press ▲▼ to select [Digital zoom +]
and then press the <SELECT> button.
The On-Screen Menu disappears and
z
[D. zoom +] appears.
2 )
Press the <SELECT> button to zoom in
the image size and press ▲▼ ◄►to
move the image to the top/ bottom/
left/ right of the screen.
The Panning function can work only when the
z
image is larger than the screen size. A projected
image can be also zoomed in by pressing the
<D.ZOOM +> or the <SELECT> button.
Digital zoom -
Zoom out the images.
1 )
Press ▲▼ to select [Digital zoom -]
and then press the <SELECT> button.
The On-Screen Menu disappears and
z
[D. zoom - ]appears.
2 )
Press the <SELECT> button to zoom
out the image size.
The projected image can be also zoomed out
z
by pressing the <D.ZOOM –> or the <SELECT>
button.
To exit the Digital zoom +/– mode, press any button
except the <D.ZOOM +/–>, <SELECT> and ▲▼◄►
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
(
) again, or adjust the screen size with the
Æ
page 37
<D.ZOOM +/–> buttons.
Note
When input computer signal to the projector, this function
z
will be available.
[Digital zoom +/-] cannot be selected when [True] is
z
selected in the [Screen] menu
[Digital zoom -] cannot be selected when [Custom] is
z
selected in the [Screen] menu
[Digital zoom +/– ]are disabled and cannot be displayed
z
when [480i], [576i], [480p], [576p], [720p], [1035i] or
[1080i ]is selected in the PC System Menu (
Keystone
This function is used to adjust keystone distortion of
the projected image.
.
.
Æ
page 37).
1 )
Press ▲▼ to select [Keystone].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to choose the item you
want to adjust.
Keystone
To correct keystone distortion
To store or reset the keystone
Store
correction
The following items are the
submenu of [Store].
Keep the keystone correction
Store
even when the AC power cord is
unplugged.
Release the keystone correction
Reset
when turn off the projector.
Ceiling
This function is used to project the image from a
ceiling-mounted projector.
1 )
Press ▲▼ to select [Ceiling] and then
press the <SELECT> button.
2 )
Press ▲▼ to change the image.
When this function is set to [On], the picture will
z
be top/bottom and left/right reversed.
Rear
This function is used to project the image from rear of
the screen.
1 )
Press ▲▼ to select [Rear] and then
press the <SELECT> button.
2 )
Press ▲▼ to change the image.
When this function is set to [On], the picture will
z
be left/right reversed.
Reset
To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset] and then
press the <SELECT> button
A confirmation box appears and then select
z
[Yes].
Screen
47
ENGLISH -
Advertisement
Table of Contents
