Table of Contents
Advertisement
Setting
Setting
Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 34),
then select the item from the sub-menu.
Remote Control
Language
1 )
Press ▲▼ to select [Language].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to select the desired
language.
The language used in the On-Screen Menu is
z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Czech, Russian, Turkish, Arabic, Kazak,
Vietnamese, Chinese, Korean, Japanese and Tha
48
- ENGLISH
Control Panel
i.
Menu position
This function is used to change the position of the On-
Screen Menu.
1 )
Press ▲▼ to select [Menu position].
2 )
Press the <SELECT> button to change
the position.
The Menu position changes each time you
z
press <SELECT> button as follows:
the center → the bottom left → the bottom right → the
top left → the top right → the center......
Auto setup
1 )
Press ▲▼ to select [Auto setup].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to select these functions as
follows:
Input search
J
This function detects the input signal
automatically. When a signal is found, the search
will stop.
Off
Input search will not work
On1
Input search works*
On2
Input search works*
*1 :
●When pressing the <AUTO SETUP> button on the
remote control or the control panel.
*2 :
●When turning on the projector by pressing the
<
> button on the remote control or the control
panel.
●●●
●
When pressing the <AUTO SETUP> button on the
remote control or control panel.
●
When the current input signal is cut off.*
* If the [Blank] or [Freeze] function is active,
cancel it to activate the Input search. It is also
unavailable when On-Screen menu is displayed.
Auto PC adj.
J
On
Enables Auto PC adjustment *
Off
Disables Auto PC adjustment
*1 :
When pressing the <AUTO SETUP> button on
the remote control or the control panel.
1
2
1
Advertisement
Table of Contents
