Philips Avent SCF356 Manual page 10

ENGLISH
10
6 The progress indicator starts to fill up gradually with white light to
show the progress of the milk warming process. (Fig. 8)
Note: The progress indicator shows the progress of the milk warming process.
The progress indicator starts flashing when the appliance is on. When the
first warming phase has been completed, the bottom segment lights up
continuously and the next segment starts flashing to show that the second
warming phase is in progress. These steps continue until the third warming
phase has been completed. Now the entire progress indicator lights up
continuously.
Note: During the warming process, the milk circulates to ensure even
warming.
Caution: Do not take the bottle out of the baby bottle warmer during
warming.
7 When the entire progress indicator lights up continuously, the milk
has reached the set end temperature.
When the milk is warm, you can either take the bottle out of the
,
baby bottle warmer to feed your baby right away (see section
'Feeding your baby immediately') or you can keep it warm in the
baby bottle warmer (see section 'Keeping milk warm').
Feeding your baby immediately
1 Press the on/off button to switch off the appliance and take out the
milk bottle (Fig. 9).
2 Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle and check the temperature
of the milk by sprinkling a few drops on the inside of your
wrist (Fig. 10).