Philips Avent SCF356 Manual page 13

7 When the entire progress indicator lights up continuously, the baby
food has reached the desired end temperature.
Note: Due to the large variety of baby food consistencies, it is strongly
recommended that you continuously stir the baby food and check its
temperature while it is heating up for an optimal result.
After warming, always taste the baby food to ensure it is not too
,
hot. If the baby food is not warm enough, put the container back
into the baby bottle warmer, keep it longer in the keep-warm mode
and stir the baby food.
When the baby food is warm, you can either take the baby food
,
container or jar out of the baby bottle warmer to feed your baby
right away (see section 'Feeding your baby immediately') or you can
keep it warm in the baby bottle warmer (see section 'Keeping baby
food warm').
Feeding your baby immediately
1 After warming, taste the baby food to ensure it is not too hot.
Press the on/off button to switch off the appliance and take out the
baby food container or jar (Fig. 16).
Keeping baby food warm
1 When the baby food has reached approximately the desired end
temperature, the baby bottle warmer automatically switches to
a keep-warm mode. During this mode, the baby food is kept for
20 minutes on the desired temperature.
2 The baby bottle warmer switches off automatically after
20 minutes. The progress indicator switches off to indicate that the
baby food is not kept at the desired end temperature anymore.
Note: If you want to feed your baby with the baby food at the set
temperature, you need to take the baby food out of the bottle warmer and
feed it to your baby right after the baby bottle warmer switches off. If you do
not do this, the baby food slowly cools down.
Note: You cannot prolong the keep-warm mode of the appliance.
ENGLISH
13